Wireshark · Wireshark-users: Re: [Wireshark-users] Trying to compare two traces at both server and client side

[Jaap Keuter <jaap.keuter@xxxxxxxxx>]

Hi,

Just had a quick look. Seems to be right, but a generic solution would be nice.

Thanks,
Jaap

On 03/07/2011 04:31 PM, Jeff Morriss wrote:
> We had similar problems with io,stat from the command line:
>
> https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=2880
>
> That was eventually fixed in rev 34926, so I would imagine same solution
> could be used here.
>
> Jaap Keuter wrote:
> > Hi,
> >
> > The compare feature is driven from the command line option:
> > "compare,%d,%d,%d,%d,%lf,%n". This format is scanned from the
> > parameters, either from the command line or the dialog. The problem is
> > that the time variance parameter is a floating point, where the
> > separator is expected to be a '.'. If your locale has ',' as separator
> > you end up with the partial bit of the time variance as part of the
> > filter, like you see.
> >
> > Thanks,
> > Jaap
> >
> > On 03/06/2011 11:16 AM, Bartosz Kiziukiewicz wrote:
> > > Hi Jaap,
> > >
> > > it seems to be it (or at least close to it).
> > > I'm using Windows 7 Professional 32-bit Polish
> > > with Polish locale set.
> > >
> > > I also checked it on the Windows 7 Ultimate EN on VMware machine and the
> > > Compare feature works.
> > > Is there any way to fix it on my OS (other than changing system
> > > settings)?
> > >
> > > Cheers,
> > > Bartosz.
> > >
> > >
> > >
> > > On Sun, 06 Mar 2011 10:11:03 +0100, Jaap Keuter <jaap.keuter@xxxxxxxxx>
> > > wrote:
> > >
> > > > Hi,
> > > >
> > > > What's your locale?
> > > >
> > > > Thanks,
> > > > Jaap
> > > >
> > > > On 03/04/2011 09:53 AM, Bartosz Kiziukiewicz wrote:
> > > > > Hi,
> > > > >
> > > > > I'm trying to use Wireshark "Version 1.4.3 (SVN Rev 35482 from
> > > > > /trunk-1.4)" under Windows 7 OS to compare two packet
> > > > > traces that were made at (lets say) a server and a client side.
> > > > > There's a Statistics -> Compare feature that should do the job, at
> > > > > least
> > > > > on the basic level.
> > > > > However it does not seem to work at all.
> > > > > I merged two trace files together, set time variance to 2 seconds and
> > > > > entered a display filter: "ip.addr==192.168.0.62".
> > > > > After pressing the "Create stat" button I got: "Filter
> > > > > "000000,ip.addr==192.168.0.62" is invalid - Syntax error.".
> > > > > Is there any special way that should be followed to make such
> > > > > comparison?