Wireshark · Wireshark-users: Re: [Wireshark-users] Trying to compare two traces at both server and client side

[Jeff Morriss <jeff.morriss.ws@xxxxxxxxx>]

We had similar problems with io,stat from the command line:

https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=2880

That was eventually fixed in rev 34926, so I would imagine same solution 
could be used here.

Jaap Keuter wrote:
> Hi,
>
> The compare feature is driven from the command line option:
> "compare,%d,%d,%d,%d,%lf,%n". This format is scanned from the 
> parameters, either from the command line or the dialog. The problem is 
> that the time variance parameter is a floating point, where the 
> separator is expected to be a '.'. If your locale has ',' as separator 
> you end up with the partial bit of the time variance as part of the 
> filter, like you see.
>
> Thanks,
> Jaap
>
> On 03/06/2011 11:16 AM, Bartosz Kiziukiewicz wrote:
> > Hi Jaap,
> >
> > it seems to be it (or at least close to it).
> > I'm using Windows 7 Professional 32-bit Polish
> > with Polish locale set.
> >
> > I also checked it on the Windows 7 Ultimate EN on VMware machine and the
> > Compare feature works.
> > Is there any way to fix it on my OS (other than changing system 
> > settings)?
> >
> > Cheers,
> > Bartosz.
> >
> >
> >
> > On Sun, 06 Mar 2011 10:11:03 +0100, Jaap Keuter <jaap.keuter@xxxxxxxxx>
> > wrote:
> >
> > > Hi,
> > >
> > > What's your locale?
> > >
> > > Thanks,
> > > Jaap
> > >
> > > On 03/04/2011 09:53 AM, Bartosz Kiziukiewicz wrote:
> > > > Hi,
> > > >
> > > > I'm trying to use Wireshark "Version 1.4.3 (SVN Rev 35482 from
> > > > /trunk-1.4)" under Windows 7 OS to compare two packet
> > > > traces that were made at (lets say) a server and a client side.
> > > > There's a Statistics -> Compare feature that should do the job, at 
> > > > least
> > > > on the basic level.
> > > > However it does not seem to work at all.
> > > > I merged two trace files together, set time variance to 2 seconds and
> > > > entered a display filter: "ip.addr==192.168.0.62".
> > > > After pressing the "Create stat" button I got: "Filter
> > > > "000000,ip.addr==192.168.0.62" is invalid - Syntax error.".
> > > > Is there any special way that should be followed to make such
> > > > comparison?
>
> ___________________________________________________________________________
> Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>             
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe