Wireshark · Wireshark-users: Re: [Wireshark-users] Not seeing DIAMETER CCA decodes in Wireshark

[Simon Green <Simon.Green@xxxxxxxxxxxxxxxxxxxx>]

Ah yes, that was it, thankyou! DCCA now nicely decoded.

 

Cheers

Simon

 

 

Simon Green
Senior VAS Engineer
Two Degrees Mobile Limited
==========================
(M) +64 22 023 0240
(P)  +64 9 919 7057
www.2degreesmobile.co.nz

Two Degrees Mobile Limited | 131 Khyber Pass Rd | Newmarket | Auckland | New Zealand |
PO Box 8355 | Symonds Street | Auckland 1150 | New Zealand | Fax +64 9 919 7001 

---

Disclaimer
The e-mail and any files transmitted with it are confidential and may contain privileged or copyright information. If you are not the intended recipient you must not copy, distribute, or use this e-mail or the information contained in it for any purpose other than to notify us of the error. If you have received this message in error, please notify the sender immediately, by email or phone (+64 9 919 7000) and delete this email from your system. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Two Degrees Mobile Limited. We do not guarantee that this material is free from viruses or any other defects although due care has been taken to minimize the risk

From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Anders Broman
Sent: Wednesday, 12 August 2009 9:03 p.m.
To: 'Community support list for Wireshark'
Subject: Re: [Wireshark-users] Not seeing DIAMETER CCA decodes in Wireshark

 

Hi,

This may be the problem:

The problem probably is that for 1.2.1 diameter.xml got copied from trunk but not the changes to makefile.am and wireshark.nsi

(http://anonsvn.wireshark.org/viewvc/viewvc.cgi?view=rev&revision=28849)

There was also a change to packet-diameter.c but I think that may not needed.

One solution is to delete the line:

           <!ENTITY eap SYSTEM "eap.xml">

And

&eap;

In diameter.xml the other to add the missing parts.

 

/Anders

P.S diameter.xml is in the Wireshark/dimeter dir.

 

---

Från: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] För Simon Green
Skickat: den 12 augusti 2009 01:01
Till: wireshark-users@xxxxxxxxxxxxx
Ämne: [Wireshark-users] Not seeing DIAMETER CCA decodes in Wireshark

 

Hi, I’m using Wireshark 1.2.1 and I’m trying to decode a DIAMETER Credit Control Application trace. But all I see are unknown application, unknown command & unknown AVPs. My systems are using DIAMETER application 4, which is DCCA, and is defined in my dictionary and chargectontrol XML files.

 

A sample trace can be provided if required. Any ideas?

 

Cheers

Simon

 

Simon Green
Senior VAS Engineer
Two Degrees Mobile Limited
==========================
(M) +64 22 023 0240
(P)  +64 9 919 7057
www.2degreesmobile.co.nz

Two Degrees Mobile Limited | 131 Khyber Pass Rd | Newmarket | Auckland | New Zealand |
PO Box 8355 | Symonds Street | Auckland 1150 | New Zealand | Fax +64 9 919 7001 

---

Disclaimer
The e-mail and any files transmitted with it are confidential and may contain privileged or copyright information. If you are not the intended recipient you must not copy, distribute, or use this e-mail or the information contained in it for any purpose other than to notify us of the error. If you have received this message in error, please notify the sender immediately, by email or phone (+64 9 919 7000) and delete this email from your system. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Two Degrees Mobile Limited. We do not guarantee that this material is free from viruses or any other defects although due care has been taken to minimize the risk