Hi,
This may be the problem:
The problem
probably is that for 1.2.1 diameter.xml got copied from trunk but not the
changes to makefile.am and wireshark.nsi
(http://anonsvn.wireshark.org/viewvc/viewvc.cgi?view=rev&revision=28849)
There was also a
change to packet-diameter.c but I think that may not needed.
One solution is
to delete the line:
<!ENTITY
eap SYSTEM "eap.xml">
And
&eap;
In diameter.xml the other to
add the missing parts.
/Anders
P.S diameter.xml is in the Wireshark/dimeter
dir.
Från:
wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] För Simon Green
Skickat: den 12 augusti 2009 01:01
Till:
wireshark-users@xxxxxxxxxxxxx
Ämne: [Wireshark-users] Not
seeing DIAMETER CCA decodes in Wireshark
Hi,
I’m using Wireshark 1.2.1 and I’m trying to decode a DIAMETER
Credit Control Application trace. But all I see are unknown application,
unknown command & unknown AVPs. My systems are using DIAMETER application
4, which is DCCA, and is defined in my dictionary and chargectontrol XML files.
A
sample trace can be provided if required. Any ideas?
Cheers
Simon
Simon
Green
Senior VAS Engineer
Two
Degrees Mobile Limited
==========================
(M)
+64 22 023 0240
(P)
+64 9 919 7057
www.2degreesmobile.co.nz
Two
Degrees Mobile Limited | 131 Khyber Pass Rd | Newmarket
| Auckland | New Zealand |
PO Box 8355 | Symonds Street | Auckland 1150 | New Zealand
| Fax +64 9 919 7001
Disclaimer
The e-mail and any files transmitted with it are confidential and may contain
privileged or copyright information. If you are not the intended recipient you
must not copy, distribute, or use this e-mail or the information contained in
it for any purpose other than to notify us of the error. If you have received
this message in error, please notify the sender immediately, by email or phone
(+64 9 919 7000) and delete this email from your system. Any views expressed in
this message are those of the individual sender, except where the sender
specifically states them to be the views of Two Degrees Mobile Limited. We do
not guarantee that this material is free from viruses or any other defects
although due care has been taken to minimize the risk