So when you select Capture/Start in Ethereal, there are no interfaces listed
in the drop-down Interface list?
All I can suggest is what the help page for the packet driver says
(at the bottom of
http://netgroup-serv.polito.it/winpcap/install/help/95.htm )
----------
Troubleshooting
If you have any problem installing the capture driver, please follow these
instructions:
Remove capture driver.
Remove all network adapter driver including all modems and network card
adapter different from the Ethernet network card you're planning to use as
capture device.
Re-install the capture driver.
Verify the driver is working properly.
Re-install all other network driver you previously removed.
-----------
Sorry, I don't have any other suggestions than that. Maybe someone else on
the list does.
Mike K
----- Original Message -----
From: "Stefan Ulrich" <Stefan.Ulrich@xxxxxxxxxxxxx>
To: "Mike Kenning" <mkenning@xxxxxxxx>
Sent: October 31, 2000 12:48 AM
Subject: Re: [Ethereal-users] Etherreal for Win 98
> > "Network Packet Driver for Win95/98 v 2.02 -> Brand name of your
ethernet card"
>
> This is written in my control panel but Etherreal is unable to locate
> the interface.
>
> Stefan
>
