Wireshark-users: Re: [Wireshark-users] Multiple Comma Delimited IPs in ip.src field
Jeff Morriss <jeff.morriss.ws@...> writes:
> On Fri, Jul 22, 2016 at 9:33 AM, tficarra
<tim.ficarra-oYYqNANdrXYAvxtiuMwx3w@xxxxxxxxxxxxxxxx> wrote:Hi,
> When running tshark, I occasionally see instances where fields contain
> comma delimited lists of values. For example, an ip.src field delimited
> by pipe may contain two ips: 192.168.1.1,8.8.8.8. I am not sure how to
> interpret this output.
> I am running tshark as follows:
> sudo tshark -i eth0 -l -E separator='|' -T fields -e frame.time_epoch -e
> ip.src -e ip.dst -e udp.srcport -e udp.dstport -e tcp.srcport -e
> tcp.dstport -e dns.flags.response -e dns.qry.name -e dns.flags.rcode -e
> ip.proto -e dns.resp.addr -e frame.time_delta_displayed -e ip.len -e
> tcp.flags -e eth.src -e eth.dst -e frame.len -e http.request -e
> http.response
> In some instances I receive output akin to the following:
> 1469188329.151229000|192.168.1.113,8.8.8.6|8.8.8.6,192.168.1.113|53|
> 39389|||1|daisy.ubuntu.com|0|1,17|162.213.33.133,162.213.33.164|
> 0.000249000|122,94||00:25:90:df:ff:52|ec:bd:1d:2d:bc:77|136
>
>
> You're probably capturing some frames that have 2 IP sources in
them--usually because you've got IP-in-IP somehow.The most common example of
this would be an ICMP response where you'll have the IP source of the node
sending the ICMP as well as the IP source of the encapsulated IP packet (the
one that couldn't, for example, be delivered). But you'll get the same
behavior with any number of tunneling protocols.
Note that you can control (to some degree) which occurrence of a particular
field you want to see. This is accomplished using "-E occurrence=f|l|a".
So, if you only want the first occurrence, use "-E occurrence=f".
- Chris
