Wireshark · Wireshark-users: Re: [Wireshark-users] Using Wireshark for a DSL "link no surf" problem

["Frank Bulk" <frnkblk@xxxxxxxxx>]

Some Comtrend modems can do a port mirror of the WAN (DSL) side. 

Frank

-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Kok-Yong Tan
Sent: Tuesday, June 17, 2014 4:53 PM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] Using Wireshark for a DSL "link no surf"
problem


> On Jun 17, 2014, at 14:28, Jaap Keuter <jaap.keuter@xxxxxxxxx> wrote:
> 
>> On 06/17/2014 08:42 PM, Kok-Yong Tan wrote:
>> Is it possible to use Wireshark to troubleshoot a DSL "link no surf"
problem?  The ISP insists it's a CPE issue but the problem only started
after their Tier 1 tech monkeyed with the DSLAM and/or the CPE (remotely) in
some manner.  I find it suspicious that the problem was intermittent packet
loss until they tinkered, whereupon the problem became a "link no surf"
issue (i.e., there's Layer 2 connectivity but zero Layer 3 traffic passing).
> 
> Depends on what you can trace in the CPE, as in, how close to the DSL
interface.
> Otherwise you'll need capture hardware on the DSL....
> 
> Good luck,
> Jaap
> 

I can get up to the DSL modem itself.  In hindsight, I'm thinking this isn't
going to be of much use and the only way to debug this is with capture
hardware on the DSL side as you suggested.  Drat.
--
Sent from my iPad2 with greater chance of typographical, grammatical and
other disasters.  Your indulgence is even more humbly requested.