Wireshark · Wireshark-users: Re: [Wireshark-users] One NIC on public side

["Gianluca Varenni" <gianluca.varenni@xxxxxxxxxxxx>]

This means that WinPcap is properly installed.

Are you sure the NICs are connected to the proper ports on the hub?

GV

--------------------------------------------------
From: <mike@xxxxxxxxxxxx>
Sent: Thursday, May 13, 2010 5:01 PM
To: "wireshark-users" <wireshark-users@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-users] One NIC on public side

> On Thu, 13 May 2010 16:54:43 -0700, Gianluca Varenni wrote:
> > WinPcap does not show in the list of protocols of the NIC. Do the NICs 
> > get
> > listed in Wireshark?
>
> Never had this problem before but then, never installed it on a 64bit 
> server either. Maybe that's related?
> Yes, both nics show up in the list that wireshark can see.
> I have nic0 connected to the lan and nic1 is connected into that hub which 
> should be pre-firewall traffic but it sees nothing at all for packets.
>
> In the wireshark list, it shows up at the proper driver with IP unknown of 
> course.
>
> ___________________________________________________________________________
> Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe