Hi,
You could use
Nedi which works also on windows or option is to use
WIR3D under vm machine.
On Mon, Jan 25, 2010 at 3:58 PM, Michael Glenn
<MGlenn@xxxxxxxxxxxxxxx> wrote:
*Looks up Netdisco.*
....Ooooooo....
:)
You could also use Netdisco, which would build the DB for you.
Interesting thought: I wonder if I could pull the spanning tree tables off my switches via SNMP and use them to build a database of port to MAC connections. I already have a table of all the user workstations' MAC addresses.
>>> Andrew Gallo
akg1330@xxxxxxxxx> 01/22/2010 08:47 >>....
Two options I see:
Make a matrix of mac addresses to jack number/office numbers and then
look at the switch's CAM table. You'll then see what port goes to what
office.
If the switch is running spanning tree, you could sniff each port and
look at the source MAC of the BPDU. This should be the MAC address of
the connected switchport.
The information contained in this e-mail and any accompanying documents is intended for the sole use of the recipient to whom it is addressed, and may contain information that is privileged, confidential, and prohibited from disclosure under applicable law. If you are not the intended recipient, or authorized to receive this on behalf of the recipient, you are hereby notified that any review, use, disclosure, copying, or distribution is prohibited. If you are not the intended recipient(s), please contact the sender by e-mail and destroy all copies of the original message. Thank you.
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
