Hi. I desperately need to see packets
coming from OR going to ip 207.35.208.194 using capture filter
Works fine with display filter only but this
is a really busy network and I need to ultimately save the capture to a file
thus need a capture filter.
[]# tshark -i eth1 -R "ip.dst == 207.35.208.194 or
ip.src == 207.35.208.194"
Capturing on eth1
13.306484 207.35.208.194 -> 208.77.1.33 SIP
Request: REGISTER sip:proxyc11b.italkbb.com
13.307911 208.77.1.33 -> 207.35.208.194 SIP
Status: 200 OK (1 bindings)
20.787232 207.35.208.194 -> 208.77.1.33 SIP
Request: REGISTER sip:proxyc11b.italkbb.com
20.788120 208.77.1.33 -> 207.35.208.194 SIP
Status: 200 OK (1 bindings)
Just host should show packets both ways
(like example above) and does not
[]# tshark -i eth1 host 207.35.208.194
Capturing on eth1
0.000000 208.77.1.33 -> 207.35.208.194 SIP
Status: 200 OK (1 bindings)
7.475218 208.77.1.33 -> 207.35.208.194 SIP
Status: 200 OK (1 bindings)
6 packets captured
Src host does not work but dst host does
work
[]# tshark -i eth1 dst host 207.35.208.194 or src host
207.35.208.194
Capturing on eth1
0.000000 208.77.1.33 -> 207.35.208.194 SIP
Status: 200 OK (1 bindings)
7.475218 208.77.1.33 -> 207.35.208.194 SIP
Status: 200 OK (1 bindings)
6 packets captured
This shows that src host does not work all
by itself either
[]# tshark -i eth1 src host 207.35.208.194
Capturing on eth1
0 packets captured
Here is my version stuff
TShark 1.0.3
Copyright 1998-2008 Gerald Combs
<gerald@xxxxxxxxxxxxx> and contributors.
This is free software; see the source for copying
conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled with GLib 2.12.3, with libpcap 0.9.4, with libz
1.2.3, without POSIX
capabilities, with libpcre 6.6, with SMI 0.4.5, without
ADNS, without Lua, with
GnuTLS 1.4.1, with Gcrypt 1.2.3, with MIT Kerberos.
Running on Linux 2.6.18-92.1.22.el5, with libpcap version
0.9.4.
Built using gcc 4.1.2 20071124 (Red Hat 4.1.2-42).
