Thanks Robert!
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Robert D. Scott
Sent: Wednesday, October 28, 2009 11:07 AM
To: 'Community support list for Wireshark'
Subject: Re: [Wireshark-users] Disabling TCP Checksum
Not too much, unless you are actually dealing with a NIC that is spewing
traffic with improperly framed data, or looking at a line where noise is an
issue. For your daily sniff where you are looking primarily at protocol
information there is little impact. Of course you can always just ignore it
as well.
Robert D. Scott Robert@xxxxxxx
Senior Network Engineer 352-273-0113 Phone
CNS - Network Services 352-392-2061 CNS Phone Tree
University of Florida 352-392-9440 FAX
Florida Lambda Rail 352-294-3571 FLR NOC
Gainesville, FL 32611 321-663-0421 Cell
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Sheahan, John
Sent: Wednesday, October 28, 2009 11:00 AM
To: 'wireshark-users@xxxxxxxxxxxxx'
Subject: [Wireshark-users] Disabling TCP Checksum
To avoid the TCP checksum errors for my own machine, I disabled the box that
says "Validate the TCP Checksum when possible" under
Preferences/Protocols/TCP.
My question is, although this clears up my traces from constantly getting
the "TCP Checksum Error", are there any cons that I am opening myself up to
by changing this setting and should be aware of?
Thanks
John
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
