Wireshark · Wireshark-users: Re: [Wireshark-users] need to find what blocks icmp

["SMITH, RICHARD S (RICH), ATTLABS" <rsmith62@xxxxxxx>]

Not sure it matters if Windows Firewall is turned on or not but check
the icmp setting anyway at:

Control Panel
Windows Firewall
Advanced Tab
ICMP Settings
Allow incomeing echo request

Slightly remember this setting taking affect whether you have the
firewall turned on or not 

-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of
chuck@xxxxxxxxxxxxxx
Sent: Thursday, August 20, 2009 1:01 AM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] need to find what blocks icmp

I just started watching this thread, so I hope I am not repeating
something that has already been mentioned.

This is in WinXP Pro

Open Network Connections
Double-click TCP/IP. This opens properties
Click on advanced in the lower right corner
Click the options tab
Select TCP/IP filtering, then click Properties
Make sure "Enable TCP/IP Filtering (All adapters)" is unchecked.

$.02,

Chuck Bland


________________________________________________________________________
___
Sent via:    Wireshark-users mailing list
<wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
 
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe