Hi,
I was hoping someone could help me with this
issue. I have configured IPSec on two Windows 2003 servers using
certificates as the authentication. If I run wireshark from one of the
server while having both servers on the same network, I can see a bunch of ESP
which indicate to me that the traffic is encrypted between the two
servers. If I move one of the servers to another network (DMZ) and try to
communicate with the server located on the trusted network, I can’t and
instead of getting ESP packets all I see is ISAKMP packets. I have
not change anything on the IPsec except the ip for the server that has been
moved to the DMZ. The trusted network as a 192.168.10.X subnet and the
one on the DMZ is 192.168.20.X.
If I remove IPSec I can communicate from the DMZ to the LAN
as intended which indicate routing on the firewall is working fine. I
know it is kind of confusing, but I’m trying to figure out why WireShark
shows ESP packets when the server is on the LAN and ISAKMP packets when the
server is moved to the DMZ.
Thanks,
Josue
Please remember coverage cannot be bound, amended or cancelled via the email or voicemail system. You cannot bind, alter, or cancel coverage without speaking to an authorized representative of Braishfield Associates, Inc. Coverage cannot be assumed to be bound without confirmation from an authorized representative of Braishfield Associates, Inc.
DISCLAIMER:
CONFIDENTIALITY NOTICE: Braishfield Associates, Inc. would like you to know that the information contained in this communication, including attachments is privileged and confidential. It is intended only for the exclusive use of the addressee. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. Insurance coverage can not be bound, amended or changed via an e-mail message without knowledge or consent from the insuring carrier. If you have received this communication in error please notify us by telephone immediately at (407) 825-9911 or e-mail disclaimer@xxxxxxxxxxxxxxx. Thank you.
|
