Wireshark-users: Re: [Wireshark-users] Does Wireshark support MP4 payload decoding?
Hi,
There is currently no MP4V-ES payload dissector. I'm not sure how much this overlaps
with other MPEG4 dissectors we have. I have started a mp4ves dissector to begin to
dissect the config parameter in SDP some time ago (very rudaementary) I guess I could check it
in as a starting point ( I'll have to check it's status first) would that be of intrest?
Regards
Anders
________________________________
From: wireshark-users-bounces@xxxxxxxxxxxxx on behalf of Javier Gálvez Guerrero
Sent: Tue 6/3/2008 2:01 PM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] Does Wireshark support MP4 payload decoding?
Hi,
2008/6/3 Anders Broman <anders.broman@xxxxxxxxxxxx>:
Hi,
What protocol is used to set up the stream? is SDP used?
Yes, the video on demand procedure is started with a RTSP packet exchange with a SDP file with the corresponding parameters. It is properly decoded with Wireshark.
What Mime type is it MP4V-ES other?
As said before, I have tried with elementary and program streams. In the last case, I have mpeg4-generic MIME type for audio and MP4V-ES for video.
What do you want decoded?
I would like to catch information regarding which frames are being streamed (I, P or B).
Anyway, have you succeed in decoding this kind of information from the UDP/RTP/MP4 packet stream?
Regards
Anders
Thanks for your answer,
Javi
________________________________
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Javier Gálvez Guerrero
Sent: den 3 juni 2008 11:37
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Does Wireshark support MP4 payload decoding?
Hi all,
I have searched for this issue in the archive but the question was not answered yet, so here I am.
I would like to know if Wireshark does support MP4 packets decoding. I am using version 1.0.0 in an Ubuntu Linux 2.6.24-17. I am also using VideoLAN VLC on the VOD server side and on the player client side. I have tried with originally mp4 encoded videos, on-the-fly decoded ones from MPEG-1 and with elementary video streams. They work perfectly (I can stream and watch the videos) but when I try to decode the UDP/RTP packets with Wireshark the payload is marked as unknown. With MPEG-1 it works properly as soon as I have tested.
So, has anyone succeed in decoding the RTP payload for a MP4 stream (if not with VLC, with which streaming software?)?
Thank you all,
Javi
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
<<winmail.dat>>