Wireshark · Wireshark-users: [Wireshark-users] [FIXED] Can't find USB device

[Daniel DeFreez <daniel.defreez@xxxxxxxxxxxxxxxx>]

I got Wireshark up and running with USB. The problem was that 
/proc/bus/usb wasn't being populated for some reason.
mount -t usbfs /dev/bus/usb /proc/bus/usb

--- Daniel

Daniel DeFreez wrote:
> Hello all ---
>
> I'm trying to get Wireshark to work with USB. Reading through the wiki 
> and the archives I've done the following:
> - verified that usbmon is on my system
> - compiled libpcap CVS from tcpdump.org (version reads 0.9 - PRECVS, is 
> this correct??)
> - recompiled wireshark with new libpcap
> - started up usbmon then wireshark
>
> Yet, when I go capture -> interfaces, I still just see the normal eth0, 
> eth1, etc. No USB interfaces.
>
> Anyone have any ideas about what I'm missing?
>
> Thanks,
>
> Daniel
>
> P.S.
>
> I apologize if this gets double-posted - Thunderbird and I had a little 
> spat.
>
>
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>