Wireshark · Wireshark-users: Re: [Wireshark-users] Cannot compile on FC5

["小容" <zrong.xu@xxxxxxxxx>]

Hi,Rich Gomes ,
    Yes ,there are maybe some bugs in the code of this version of
wireshark .The same phenomena also appear usually on FC4.
     I don't know what reason cause this problem but if you don't
need the function of SNMP,you can resolve it thought this below:
     ./configure --without-net-snmp --without-ucd-snmp

     then recompile the source code,everything is OK,Good luck!

2006/6/28, Rich Gomes <RichGomes@xxxxxxxxxxx>:
> Yup, net-snmp, net-snmp-devel, net-snmp-lib all installed.
>
> [root@localhost ~]# rpm -qa | grep net-snmp
> net-snmp-libs-5.3-4.2
> net-snmp-5.3-4.2
> net-snmp-devel-5.3-4.2
> [root@localhost ~]#
>
> Here are the results of ./configure:
>
> checking build system type... i686-pc-linux-gnu
> checking host system type... i686-pc-linux-gnu
> checking target system type... i686-pc-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... gcc -E
> checking for a sed that does not truncate output... /bin/sed
> checking for egrep... grep -E
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependent libraries... pass_all
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking for g++... g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking dependency style of g++... gcc3
> checking how to run the C++ preprocessor... g++ -E
> checking for g77... no
> checking for f77... no
> checking for xlf... no
> checking for frt... no
> checking for pgf77... no
> checking for fort77... no
> checking for fl32... no
> checking for af77... no
> checking for f90... no
> checking for xlf90... no
> checking for pgf90... no
> checking for epcf90... no
> checking for f95... f95
> checking whether we are using the GNU Fortran 77 compiler... yes
> checking whether f95 accepts -g... yes
> checking the maximum length of command line arguments... 32768
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for objdir... .libs
> checking for ar... ar
> checking for ranlib... ranlib
> checking for strip... strip
> checking if gcc static flag  works... yes
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC
> checking if gcc PIC flag -fPIC works... yes
> checking if gcc supports -c -o file.o... yes
> checking whether the gcc linker (/usr/bin/ld) supports shared libraries...
> yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dlopen... no
> checking for dlopen in -ldl... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by g++... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared libraries...
> yes
> checking for g++ option to produce PIC... -fPIC
> checking if g++ PIC flag -fPIC works... yes
> checking if g++ supports -c -o file.o... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared libraries...
> yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for shl_load... (cached) no
> checking for shl_load in -ldld... (cached) no
> checking for dlopen... (cached) no
> checking for dlopen in -ldl... (cached) yes
> checking whether a program can dlopen itself... (cached) yes
> checking whether a statically linked program can dlopen itself... (cached)
> yes
> appending configuration tag "F77" to libtool
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for f95 option to produce PIC... -fPIC
> checking if f95 PIC flag -fPIC works... yes
> checking if f95 supports -c -o file.o... yes
> checking whether the f95 linker (/usr/bin/ld) supports shared libraries...
> yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for bison... bison -y
> checking for flex... flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for perl... /usr/bin/perl
> checking for pod2man... /usr/bin/pod2man
> checking for pod2html... /usr/bin/pod2html
> checking for htmlview... /usr/bin/htmlview
> checking for flex... /usr/bin/flex
> checking for python... /usr/bin/python
> checking for doxygen... no
> checking for doxygen... no
> checking for libgnutls-config... no
> checking for libgnutls - version >= 1.0.0... no
> *** The libgnutls-config script installed by LIBGNUTLS could not be found
> *** If LIBGNUTLS was installed in PREFIX, make sure PREFIX/bin is in
> *** your path, or set the LIBGNUTLS_CONFIG environment variable to the
> *** full path to libgnutls-config.
> echo gnuTLS not found, disabling ssl decryption
> checking for xsltproc... /usr/bin/xsltproc
> checking for xsltproc... yes
> checking for xmllint... /usr/bin/xmllint
> checking for xmllint... yes
> checking for fop... no
> checking for fop... no
> checking for hhc.exe... no
> checking for hhc.exe... no
> checking for pkgproto... no
> checking for pkgmk... no
> checking for pkgtrans... no
> checking for rpm... yes
> checking to see if we can redefine _topdir... yes
> checking to see if we can add '-Wall -W ' to CFLAGS... yes
> checking for platform-specific compiler flags... none needed
> checking whether to use /usr/local for headers and libraries... yes
> checking for GNU sed as first sed in PATH... yes
> checking if profile builds must be generated... no
>
> checking for pkg-config... /usr/bin/pkg-config
> checking for GTK+ - version >= 2.0.0... yes (version 2.8.19)
>
> checking for pkg-config... (cached) /usr/bin/pkg-config
> checking for GLIB - version >= 2.0.0... yes (version 2.10.3)
> checking whether GLib supports loadable modules... yes
> checking for inttypes.h... (cached) yes
> checking whether inttypes.h defines the PRI[doxu]64 macros... yes
> checking for gethostbyname... yes
> checking for connect... yes
> checking whether to use libpcap for packet capture... yes
> checking for extraneous pcap header directories... not found
> checking pcap.h usability... yes
> checking pcap.h presence... yes
> checking for pcap.h... yes
> checking for pcap_open_live in -lpcap... yes
> checking whether pcap_version is defined by libpcap... yes
> checking for pcap_open_dead... yes
> checking for pcap_freecode... yes
> checking whether pcap_findalldevs is present and usable... yes
> checking for pcap_datalink_val_to_name... yes
> checking for pcap_datalink_name_to_val... yes
> checking for pcap_list_datalinks... yes
> checking for pcap_set_datalink... yes
> checking for pcap_lib_version... yes
> checking for pcap_get_selectable_fd... yes
> checking whether to use zlib for reading compressed capture files... yes
> checking zlib.h usability... yes
> checking zlib.h presence... yes
> checking for zlib.h... yes
> checking for gzgets in -lz... yes
> checking for gzgets missing when linking with X11... no
> checking whether to use libpcre for regular expressions in dfilters... yes
> checking pcre.h usability... yes
> checking pcre.h presence... yes
> checking for pcre.h... yes
> checking for pcre_compile in -lpcre... yes
> checking whether to use liblua for the lua scripting plugin... no
> checking whether to enable ipv6 name resolution if available... yes
> checking ipv6 stack type... "linux-glibc, inet6"
> checking whether to install wireshark setuid... no
> checking for ANSI C header files... (cached) yes
> checking direct.h usability... no
> checking direct.h presence... no
> checking for direct.h... no
> checking dirent.h usability... yes
> checking dirent.h presence... yes
> checking for dirent.h... yes
> checking fcntl.h usability... yes
> checking fcntl.h presence... yes
> checking for fcntl.h... yes
> checking netdb.h usability... yes
> checking netdb.h presence... yes
> checking for netdb.h... yes
> checking stdarg.h usability... yes
> checking stdarg.h presence... yes
> checking for stdarg.h... yes
> checking stddef.h usability... yes
> checking stddef.h presence... yes
> checking for stddef.h... yes
> checking for unistd.h... (cached) yes
> checking sys/ioctl.h usability... yes
> checking sys/ioctl.h presence... yes
> checking for sys/ioctl.h... yes
> checking sys/param.h usability... yes
> checking sys/param.h presence... yes
> checking for sys/param.h... yes
> checking sys/socket.h usability... yes
> checking sys/socket.h presence... yes
> checking for sys/socket.h... yes
> checking sys/sockio.h usability... no
> checking sys/sockio.h presence... no
> checking for sys/sockio.h... no
> checking for sys/stat.h... (cached) yes
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking for sys/types.h... (cached) yes
> checking sys/utsname.h usability... yes
> checking sys/utsname.h presence... yes
> checking for sys/utsname.h... yes
> checking sys/wait.h usability... yes
> checking sys/wait.h presence... yes
> checking for sys/wait.h... yes
> checking netinet/in.h usability... yes
> checking netinet/in.h presence... yes
> checking for netinet/in.h... yes
> checking arpa/inet.h usability... yes
> checking arpa/inet.h presence... yes
> checking for arpa/inet.h... yes
> checking arpa/nameser.h usability... yes
> checking arpa/nameser.h presence... yes
> checking for arpa/nameser.h... yes
> checking iconv.h usability... yes
> checking iconv.h presence... yes
> checking for iconv.h... yes
> checking whether to use SSL library... no
> checking whether to use Net-SNMP library... yes, if available
> checking for net-snmp-config... /usr/bin/net-snmp-config
> checking net-snmp/net-snmp-config.h usability... yes
> checking net-snmp/net-snmp-config.h presence... yes
> checking for net-snmp/net-snmp-config.h... yes
> checking net-snmp/library/default_store.h usability... yes
> checking net-snmp/library/default_store.h presence... yes
> checking for net-snmp/library/default_store.h... yes
> Net-SNMP requires openssl but ssl not enabled - disabling Net-SNMP
> checking whether to use UCD SNMP library... yes, if available
> checking ucd-snmp/ucd-snmp-config.h usability... yes
> checking ucd-snmp/ucd-snmp-config.h presence... yes
> checking for ucd-snmp/ucd-snmp-config.h... yes
> checking whether UCD SNMP includes sprint_realloc_objid... yes
> checking whether to use kerberos... yes
> checking for krb5-config... /usr/kerberos/bin/krb5-config
> checking krb5.h usability... yes
> checking krb5.h presence... yes
> checking for krb5.h... yes
> checking whether the Kerberos library is Heimdal or MIT... MIT
> checking whether MIT includes krb5_kt_resolve... yes
> checking whether krb5.h defines KEYTYPE_ARCFOUR_56... no
> checking whether to use the GNU ADNS library if available... yes
> checking for adns_init in -ladns... no
> checking for sa_len in struct sockaddr... no
> checking whether byte ordering is bigendian... no
> checking whether gcc needs -traditional... no
> checking for getopt... yes
> checking for snprintf... yes
> checking for strerror... yes
> checking for strcasecmp... yes
> checking for strncasecmp... yes
> checking for mkstemp... yes
> checking for g_ascii_strtoull... yes
> checking for inet_aton... yes
> checking for library containing inet_pton... none required
> checking for broken inet_pton... ok
> checking for library containing inet_ntop... none required
> checking for inet_ntop prototype... yes
> checking for strptime... yes
> checking for getprotobynumber... yes
> checking for gethostbyname2... yes
> checking for issetugid... no
> checking for mmap... yes
> checking for mprotect... yes
> checking for sysconf... yes
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating doxygen.cfg
> config.status: creating doc/Makefile
> config.status: creating epan/Makefile
> config.status: creating epan/doxygen.cfg
> config.status: creating epan/dfilter/Makefile
> config.status: creating epan/dissectors/Makefile
> config.status: creating epan/ftypes/Makefile
> config.status: creating gtk/Makefile
> config.status: creating gtk/doxygen.cfg
> config.status: creating help/Makefile
> config.status: creating packaging/Makefile
> config.status: creating packaging/nsis/Makefile
> config.status: creating packaging/rpm/Makefile
> config.status: creating packaging/rpm/SPECS/Makefile
> config.status: creating packaging/rpm/SPECS/wireshark.spec
> config.status: creating packaging/svr4/Makefile
> config.status: creating packaging/svr4/checkinstall
> config.status: creating packaging/svr4/pkginfo
> config.status: creating plugins/Makefile
> config.status: creating plugins/acn/Makefile
> config.status: creating plugins/agentx/Makefile
> config.status: creating plugins/artnet/Makefile
> config.status: creating plugins/asn1/Makefile
> config.status: creating plugins/ciscosm/Makefile
> config.status: creating plugins/docsis/Makefile
> config.status: creating plugins/enttec/Makefile
> config.status: creating plugins/giop/Makefile
> config.status: creating plugins/gryphon/Makefile
> config.status: creating plugins/h223/Makefile
> config.status: creating plugins/irda/Makefile
> config.status: creating plugins/lua/Makefile
> config.status: creating plugins/lwres/Makefile
> config.status: creating plugins/mate/Makefile
> config.status: creating plugins/megaco/Makefile
> config.status: creating plugins/mgcp/Makefile
> config.status: creating plugins/opsi/Makefile
> config.status: creating plugins/pcli/Makefile
> config.status: creating plugins/profinet/Makefile
> config.status: creating plugins/rdm/Makefile
> config.status: creating plugins/rlm/Makefile
> config.status: creating plugins/rtnet/Makefile
> config.status: creating plugins/rudp/Makefile
> config.status: creating plugins/stats_tree/Makefile
> config.status: creating plugins/v5ua/Makefile
> config.status: creating tools/Makefile
> config.status: creating tools/lemon/Makefile
> config.status: creating config.h
> config.status: executing depfiles commands
> configure: configuring in wiretap
> configure: running /bin/sh './configure' --prefix=/usr/local
> --cache-file=/dev/null --srcdir=.
> checking build system type... i686-pc-linux-gnu
> checking host system type... i686-pc-linux-gnu
> checking target system type... i686-pc-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... gcc -E
> checking for bison... bison -y
> checking for flex... flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for a sed that does not truncate output... /bin/sed
> checking for egrep... grep -E
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependent libraries... pass_all
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking for g++... g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking dependency style of g++... gcc3
> checking how to run the C++ preprocessor... g++ -E
> checking for g77... no
> checking for f77... no
> checking for xlf... no
> checking for frt... no
> checking for pgf77... no
> checking for fort77... no
> checking for fl32... no
> checking for af77... no
> checking for f90... no
> checking for xlf90... no
> checking for pgf90... no
> checking for epcf90... no
> checking for f95... f95
> checking whether we are using the GNU Fortran 77 compiler... yes
> checking whether f95 accepts -g... yes
> checking the maximum length of command line arguments... 32768
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for objdir... .libs
> checking for ar... ar
> checking for ranlib... ranlib
> checking for strip... strip
> checking if gcc static flag  works... yes
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC
> checking if gcc PIC flag -fPIC works... yes
> checking if gcc supports -c -o file.o... yes
> checking whether the gcc linker (/usr/bin/ld) supports shared libraries...
> yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by g++... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared libraries...
> yes
> checking for g++ option to produce PIC... -fPIC
> checking if g++ PIC flag -fPIC works... yes
> checking if g++ supports -c -o file.o... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared libraries...
> yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> appending configuration tag "F77" to libtool
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for f95 option to produce PIC... -fPIC
> checking if f95 PIC flag -fPIC works... yes
> checking if f95 supports -c -o file.o... yes
> checking whether the f95 linker (/usr/bin/ld) supports shared libraries...
> yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for flex... /usr/bin/flex
> checking to see if we can add '-Wall -W -Wcast-qual ' to CFLAGS... yes
> checking for platform-specific compiler flags... none needed
> checking if profile builds must be generated... no
>
> checking for pkg-config... /usr/bin/pkg-config
> checking for GLIB - version >= 2.0.0... yes (version 2.10.3)
> checking whether to use /usr/local for headers and libraries... yes
> checking for ANSI C header files... (cached) yes
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking netinet/in.h usability... yes
> checking netinet/in.h presence... yes
> checking for netinet/in.h... yes
> checking for unistd.h... (cached) yes
> checking fcntl.h usability... yes
> checking fcntl.h presence... yes
> checking for fcntl.h... yes
> checking for sys/stat.h... (cached) yes
> checking for sys/types.h... (cached) yes
> checking whether byte ordering is bigendian... no
> checking for extraneous pcap header directories... found --
> -I/usr/local/include added to CFLAGS
> checking pcap.h usability... yes
> checking pcap.h presence... yes
> checking for pcap.h... yes
> checking whether to use zlib for reading compressed capture files... yes
> checking zlib.h usability... yes
> checking zlib.h presence... yes
> checking for zlib.h... yes
> checking for gzgets in -lz... yes
> checking for gzgets missing when linking with X11... no
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating config.h
> config.status: executing depfiles commands
>
>
>
> The Wireshark package has been configured with the following options.
>                     Build wireshark : yes
>                        Build tshark : yes
>                      Build capinfos : yes
>                       Build editcap : yes
>                       Build dumpcap : yes
>                      Build mergecap : yes
>                     Build text2pcap : yes
>                       Build idl2wrs : yes
>                       Build randpkt : yes
>                        Build dftest : yes
>
>                      Install setuid : no
>                         Use plugins : yes
>                    Build lua plugin : no
>                 Use GTK+ v2 library : yes
>                        Use threads : no
>             Build profile binaries : no
>                   Use pcap library : yes
>                   Use zlib library : yes
>                   Use pcre library : yes
>               Use kerberos library : yes (MIT)
>               Use GNU ADNS library : no
>             Use SSL crypto library : no
>           Use IPv6 name resolution : yes
>      Use UCD SNMP/Net-SNMP library : no
>                 Use gnutls library : no
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users