Wireshark · Wireshark-dev: Re: [Wireshark-dev] Cmake and RPM

[Jonne Zutt <jonne.zutt.ml@xxxxxxxxx>]

Thanks to Jeff's suggestion I was able to install qt5-qttools-devel which provided me with lrelease-qt5

$ dzdo yum whatprovides /usr/bin/lrelease-qt5

qt5-qttools-devel-5.2.0-0.5.beta1.fc20.i686 : Development files for qt5-qttools

"./configure --with-qt=5 --with-gtk=no" now ends with:

checking for qtchooser... /usr/lib/qtchooser/qtchooser

checking for uic... /usr/lib/qtchooser/uic

checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser

checking for moc... /usr/lib/qtchooser/moc

checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser

checking for rcc... /usr/lib/qtchooser/rcc

checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser

checking for lrelease... /usr/lib/qtchooser/lrelease

checking whether lrelease -version works... no

configure: error: /usr/lib/qtchooser/lrelease -qt=5 -version returned non-zero exit status

make: *** No targets specified and no makefile found.  Stop.

Ok, so configure fails when trying "lrelease -qt=5 -version", it seems my lrelease doesn't like the -qt=5 argument.

$ lrelease -qt=4 -version

lrelease: could not find a Qt installation of '4'

$ lrelease -qt=5 -version

lrelease: could not find a Qt installation of '5'

$ lrelease -qt=default -version

lrelease version 4.8.6

It seems to like -qt=qt5 though:

$ /usr/lib/qtchooser/lrelease -qt=qt5 -version

lrelease version 5.3.2

I changed:

                LRELEASE="$LRELEASE -qt=$qt_version"

into

                LRELEASE="$LRELEASE -qt=qt$qt_version"

Then configure seems to work:

checking for qtchooser... /usr/lib/qtchooser/qtchooser

checking for uic... /usr/lib/qtchooser/uic

checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser

checking for moc... /usr/lib/qtchooser/moc

checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser

checking for rcc... /usr/lib/qtchooser/rcc

checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser

checking for lrelease... /usr/lib/qtchooser/lrelease

checking whether lrelease -version works... ok, lrelease version 5.3.2

It seems I need to do the same for UIC:

  UIC      ui_about_dialog.h

uic: could not find a Qt installation of '5'

                UIC="$UIC -qt=qt$qt_version"

And also for MOC, RCC.

Maybe I should've changed qt_version, but anyways, I do not see a neat way for that (e.g., cannot provide --with-qt=qt5 to configure).

Seems like I'm almost there, getting to closer to build an rpm:

Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.P9teqs

+ umask 022

+ cd /export/home/jonne/wireshark/wireshark/packaging/rpm/BUILD

+ cd /export/home/jonne/wireshark/wireshark/packaging/rpm/BUILD

+ rm -rf wireshark-2.3.0

+ /usr/bin/tar -xf -

+ /usr/bin/xz -dc /export/home/jonne/wireshark/wireshark/packaging/rpm/SOURCES/wireshark-2.3.0.tar.xz

/usr/bin/tar: This does not look like a tar archive

/usr/bin/tar: Exiting with failure status due to previous errors

error: Bad exit status from /var/tmp/rpm-tmp.P9teqs (%prep)

RPM build errors:

    Bad exit status from /var/tmp/rpm-tmp.P9teqs (%prep)

Thanks for you help,

Jonne.

$ qtchooser -qt=5 -version

qtchooser: unknown option: -version

$ qtchooser -qt=5

Usage:

  qtchooser { -l | -list-versions | -print-env }

  qtchooser -run-tool=<tool name> [-qt=<Qt version>] [program arguments]

  <executable name> [-qt=<Qt version>] [program arguments]

Environment variables accepted:

 QTCHOOSER_RUNTOOL  name of the tool to be run (same as the -run-tool argument)

 QT_SELECT          version of Qt to be run (same as the -qt argument)

$ qtchooser -qt=5 -l

default

qt4-64

qt4

qt5-64

qt5

On Tue, Aug 16, 2016 at 4:14 PM, João Valverde <joao.valverde@xxxxxxxxxxxxxxxxxx> wrote:

I wasn't aware of that shell script, it might need updating.

This part of the Qt toolchain (qt-tools) is awkward, to be kind, and detection might not work always well.

Feel free to ask for help here if you get stuck.

You need lrelease to build the Qt GUI. Not sure what is going on with qtchooser.

On 08/16/2016 02:41 PM, Jonne Zutt wrote:

I see, thanks for that. I was already trying this path after reading the
reply of Anders.

I installed the rpms that were suggested
by wireshark/tools/install_rpms_for_devel.sh

I then also installed qtchooser-39-1.fc20.x86_64, but configure is still
unable to find it somehow. I guess I need to help it a bit somehow, I'll
keep trying!

Thanks,
Jonne.


....
checking for GLIB... yes
checking for Qt5Core - version >= 5.0.0... yes (version 5.3.2)
checking for Qt5Gui - version >= 5.0.0... yes (version 5.3.2)
checking for Qt5Widgets - version >= 5.0.0... yes (version 5.3.2)
checking for Qt5PrintSupport - version >= 5.0.0... yes (version 5.3.2)
checking for Qt5Multimedia - version >= 5.0.0... yes (version 5.3.2)
checking for Qt5MacExtras - version >= 5.0.0... no
checking whether Qt works without -fPIC... no
checking whether Qt works with -fPIC... yes
checking for qtchooser... no
checking for uic-qt5... /usr/bin/uic-qt5
checking for qtchooser... no
checking for moc-qt5... /usr/bin/moc-qt5
checking for qtchooser... no
checking for rcc-qt5... /usr/bin/rcc-qt5
checking for qtchooser... no
checking for lrelease-qt5... no
checking for lrelease... no
configure: error: I couldn't find lrelease-qt5 or lrelease; make sure
it's installed and in your path
make: *** No targets specified and no makefile found.  Stop.


On Tue, Aug 16, 2016 at 1:57 PM, João Valverde
<joao.valverde@tecnico.ulisboa.pt

<mailto:joao.valverde@tecnico.ulisboa.pt>> wrote:



    On 08/16/2016 10:23 AM, Jonne Zutt wrote:

        Hi all,

        Could somebody tell me what I have to do to be able to build an
        RPM package?


    You have to use autotools. :-)

    CMake doesn't support building an rpm package yet (see README.cmake).

        I successfully build wireshark using cmake and make.
        I have a working wireshark-gtk executable in the build directory
        that I
        can run and works fine.

        Now, if I try to run "make rpm-package", it seems it doesn't
        know the
        target. I wonder what I have to do to get this?

        $ make rpm-package
        make: *** No rule to make target `rpm-package'.  Stop.

        Thanks,
        Jonne.



        ___________________________________________________________________________
        Sent via:    Wireshark-dev mailing list
        <wireshark-dev@xxxxxxxxxxxxx <mailto:wireshark-dev@wireshark.org>>
        Archives:    https://www.wireshark.org/lists/wireshark-dev
        <https://www.wireshark.org/lists/wireshark-dev>
        Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
        <https://wireshark.org/mailman/options/wireshark-dev>
                     mailto:wireshark-dev-request@wireshark.org
        <mailto:wireshark-dev-request@wireshark.org>?subject=unsubscribe

    ___________________________________________________________________________
    Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx
    <mailto:wireshark-dev@wireshark.org>>
    Archives:    https://www.wireshark.org/lists/wireshark-dev
    <https://www.wireshark.org/lists/wireshark-dev>
    Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
    <https://wireshark.org/mailman/options/wireshark-dev>
                mailto:wireshark-dev-request@wireshark.org
    <mailto:wireshark-dev-request@wireshark.org>?subject=unsubscribe




___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
            mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe