Wireshark · Wireshark-dev: Re: [Wireshark-dev] Win10 CMakeList.txt Error

[Pascal Quantin <pascal.quantin@xxxxxxxxx>]

2016-03-14 18:07 GMT+01:00 T. Scholz <scholzt234@xxxxxxxxxxxxxx>:

Well thanks for your help guys, but the problem is still the same ... :(

I checked my CMakeList.txt file and compared it with Pascal's file, but I couldn't find any difference. So I tried all the steps again ad started with the reinstallation of cmake. (Btw. my anti-virus software "Avast" is turned off during those steps, since it blocked my external commands on prompt.)

Here is the output of powershell (admin):
##########
 Extracting cmake-3.5.0-win32-x86\share\cmake-3.5\Templates\Windows\Windows_TemporaryKey.pfx
 Everything is Ok
 Folders: 83
 Files: 4375
 Size:       52802077
 Compressed: 21286287
 C:\ProgramData\chocolatey\lib\cmake.portable\tools
 ShimGen has successfully created a shim for cmake-gui.exe
 ShimGen has successfully created a shim for cmcldeps.exe
 ShimGen has successfully created a shim for cpack.exe
 ShimGen has successfully created a shim for ctest.exe
 The install of cmake.portable was successful.
##############

After that I opened my VS2013 x64 Native prompt as an admin to use my batch file, which contains the following lines:
(I also reinstalled Cygwin to its default Path C:\Cygwin.)
##############
@echo off

echo Adding Environment Vars for Wireshark-Qt ...
set CYGWIN=nodosfilewarning
set WIRESHARK_BASE_DIR=D:\Development
set WIRESHARK_TARGET_PLATFORM=win64
set QT5_BASE_DIR=D:\Development\Qt5.5\5.5\msvc2013_64
set WIRESHARK_VERSION_EXTRA=(x64_TS_PS)
set WIRESHARK_CYGWIN_INSTALL_PATH=C:\Cygwin
set VisualStudioVersion=12.0
title Command Prompt (VS 2013 x64)
echo Finished settings for enironment vars ...
echo Adding new directory for Wireshark x64 ...
mkdir D:\Development\wsbuild64_VS2013
cd D:\Development\wsbuild64_VS2013
echo Ready for preparing VS_Cmd_x64 ...
##############

Next steps was to use the command "cmake -DENABLE_CHM_GUIDES=on -G "Visual Studio 12 Win64" ..\wireshark", which is mentioned at the dev guide. There the following error occurs:
##############
-- Performing Test CXX__w34295_w34189_VALID - Success
statuscheck linker flag - test linker flags: -Wl,--as-needed
-- Performing Test WS_LD_FLAG_VALID0
-- Performing Test WS_LD_FLAG_VALID0 - Failed
statuscheck linker flag - test linker flags: -pie
-- Performing Test WS_LD_FLAG_VALID1
-- Performing Test WS_LD_FLAG_VALID1 - Failed

CMake Error at CMakeLists.txt:758 (add_subdirectory):
  add_subdirectory given source
  "D:/Development/wireshark-win64-libs/zlib-1.2.8-ws" which is not an
  existing directory.


CMake Error at CMakeLists.txt:763 (set_target_properties):
  set_target_properties Can not find target to add properties to: zlib


CMake Error at CMakeLists.txt:765 (set_target_properties):
  set_target_properties Can not find target to add properties to: zlibstatic


-- Packagelist: AIRPCAP;CAP;CARES;GCRYPT;GEOIP;GLIB2;GMODULE2;GNUTLS;GTHREAD2;GTK2;Gettext;Git;HtmlViewer;KERBEROS;LEX;LIBSSH;LUA;M;PCAP;POD;PORTAUDIO;Perl;PythonInterp;Qt5Core;Qt5LinguistTools;Qt5Multimedia;Qt5PrintSupport;Qt5Svg;Qt5Widgets;Qt5WinExtras;SBC;SED;SETCAP;SH;SMI;WINSPARKLE;YACC;YAPP;ZLIB
-- Could NOT find AIRPCAP (missing:  AIRPCAP_INCLUDE_DIR AIRPCAP_LIBRARY)
-- AIRPCAP NOT FOUND
-- Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
-- Checking for one of the modules 'libcap'
-- Could NOT find CAP (missing:  CAP_LIBRARY CAP_INCLUDE_DIR)
-- CAP NOT FOUND
-- Could NOT find CARES (missing:  CARES_LIBRARY CARES_INCLUDE_DIR)
-- CARES NOT FOUND
-- Could NOT find GCRYPT (missing:  GCRYPT_LIBRARY GCRYPT_INCLUDE_DIR) (Required is at least version "1.4.2")
-- GCRYPT NOT FOUND
-- Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
-- Checking for one of the modules 'geoip'
-- Could NOT find GEOIP (missing:  GEOIP_LIBRARY GEOIP_INCLUDE_DIR)
-- GEOIP NOT FOUND
-- Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
-- Checking for one of the modules 'glib-2.0>=2.14.0'
CMake Error at C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148 (message):
  Could NOT find GLIB2 (missing: GLIB2_LIBRARY GLIB2_MAIN_INCLUDE_DIR)
Call Stack (most recent call first):
C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388 (_FPHSA_FAILURE_MESSAGE)
  cmake/modules/FindGLIB2.cmake:90 (find_package_handle_standard_args)
  CMakeLists.txt:829 (find_package)


-- Configuring incomplete, errors occurred!
See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeOutput.log".
See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeError.log".
##############

Also after executing the mentioned cmake command there is no new folder for the lib files at "D:\Development".

So I can't see my failure during those steps....
I don't get it, why the error occurs. Is there a way to download the libs manually, which should be downloaded by cmake?

Could you try running manually the following command and see what happens?

powershell -ExecutionPolicy ByPass -File tools\win-setup.ps1 -Destination D:\Development\wireshark-win64-libs -Platform win64
 

Am 14.03.2016 um 15:46 schrieb T. Scholz:

The Problem is, that there is no folder at "D:/Development/wireshark-win64-libs". Last time I started CMake for win7 compilation the folder and its content was automatically be downloaded, but right now I don't know how to get the folder with its content by myself.

At which part will it be downloaded? Maybe there Is a failure at this point?

Regards


Am 14.03.2016 um 10:57 schrieb T. Scholz:

Hello everyone,

today I tried to compile Wireshark for my laptop. (win10 - x64) Therefore I just did the same as I did before for win7 compilation mentioned in the dev guide. Right now I'm getting an Error using CMake:

################################
CMake Error at CMakeLists.txt:758 (add_subdirectory):
  add_subdirectory given source
  "D:/Development/wireshark-win64-libs/zlib-1.2.8-ws" which is not an
  existing directory.


CMake Error at CMakeLists.txt:763 (set_target_properties):
  set_target_properties Can not find target to add properties to: zlib


CMake Error at CMakeLists.txt:765 (set_target_properties):
  set_target_properties Can not find target to add properties to: zlibstatic


-- Packagelist: AIRPCAP;CAP;CARES;GCRYPT;GEOIP;GLIB2;GMODULE2;GNUTLS;GTHREAD2;GTK2;Gettext;Git;HtmlViewer;KERBEROS;LEX;LIBSSH;LUA;M;PCAP;POD;PORTAUDIO;Perl;PythonInterp;Qt5Core;Qt5LinguistTools;Qt5Multimedia;Qt5PrintSupport;Qt5Svg;Qt5Widgets;Qt5WinExtras;SBC;SED;SETCAP;SH;SMI;WINSPARKLE;YACC;YAPP;ZLIB
-- Could NOT find AIRPCAP (missing:  AIRPCAP_INCLUDE_DIR AIRPCAP_LIBRARY)
-- AIRPCAP NOT FOUND
-- Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
-- Checking for one of the modules 'libcap'
-- Could NOT find CAP (missing:  CAP_LIBRARY CAP_INCLUDE_DIR)
-- CAP NOT FOUND
-- Could NOT find CARES (missing:  CARES_LIBRARY CARES_INCLUDE_DIR)
-- CARES NOT FOUND
-- Could NOT find GCRYPT (missing:  GCRYPT_LIBRARY GCRYPT_INCLUDE_DIR) (Required is at least version "1.4.2")
-- GCRYPT NOT FOUND
-- Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
-- Checking for one of the modules 'geoip'
-- Could NOT find GEOIP (missing:  GEOIP_LIBRARY GEOIP_INCLUDE_DIR)
-- GEOIP NOT FOUND
-- Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
-- Checking for one of the modules 'glib-2.0>=2.14.0'
CMake Error at C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148 (message):
  Could NOT find GLIB2 (missing: GLIB2_LIBRARY GLIB2_MAIN_INCLUDE_DIR)
Call Stack (most recent call first):
C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388 (_FPHSA_FAILURE_MESSAGE)
  cmake/modules/FindGLIB2.cmake:90 (find_package_handle_standard_args)
  CMakeLists.txt:829 (find_package)


-- Configuring incomplete, errors occurred!
See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeOutput.log".
See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeError.log".
################################

Here is my batch file content:
################################
@echo off

echo Adding Environment Vars for Wireshark-Qt ...
set CYGWIN=nodosfilewarning
set WIRESHARK_BASE_DIR=D:\Development
set WIRESHARK_TARGET_PLATFORM=win64
set QT5_BASE_DIR=D:\Development\Qt5.5\5.5\msvc2013_64
set WIRESHARK_VERSION_EXTRA=(x64_TS_PS)
set WIRESHARK_CYGWIN_INSTALL_PATH=C:\Cygwin
set VisualStudioVersion=12.0
title Command Prompt (VS 2013 x64)
echo Finished settings for enironment vars ...
echo Adding new directory for Wireshark x64 ...
mkdir D:\Development\wsbuild64_VS2013
cd D:\Development\wsbuild64_VS2013
echo Ready for preparing VS_Cmd_x64 ...
################################

Since Zlib is responsible for the error, I checked my Cygwin installation whether it is installed. Looking on the package list of cygwin, "zlib", "zlib-devel" and "zlib0"  v1.2.8.3 are installed.

Is it possible to compile Wireshark for win10 machines or did I just make a simple mistake, which I haven't notieced yet?

Regards

T. Scholz


---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
            mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe