Wireshark · Wireshark-dev: Re: [Wireshark-dev] Wireshark Capture Program Shut Down Problem => Please Assist

["Maynard, Chris" <Christopher.Maynard@xxxxxxxxx>]

Memory usage might be one culprit.  Have you tried using dumpcap instead of Wireshark?

Dumpcap works very well for long term capturing.

 

- Chris

 

 

From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of John E Miles
Sent: Wednesday, May 05, 2010 1:47 PM
To: wireshark-dev@xxxxxxxxxxxxx
Cc: kris.chancery@xxxxxxxxxxxx
Subject: [Wireshark-dev] Wireshark Capture Program Shut Down Problem => Please Assist
Importance: High

 

Hello,

I am working with a customer who is capturing Ethernet data off of their Managed Switch using Wireshark and their program is shutting down unexpectedly and stopping the capture of data.

They are capturing data every (3) minutes using multiple files for a total of 480 files.  The goal is to have 480 (3) minute increments of data over the course of 24 hours.

The system shuts down around the 48th file and stops capturing data.

The Data files are ~20 MB of data so the Network is very very busy.  It is being used for Process Controls and Messaging, etc.

Can you assist on common culprits which cause these unecessary shutdowns of Wireshark?  

Please call (402.321.5057) or email me (jemiles@xxxxxxxxxxxxxxx).

Thanks!

John E. Miles
Field Service Engineer (FSE)
Customer Support & Maintenance (CSM)
Rockwell Automation
5103 S. 111th St.
Omaha, NE
Office:  402.593.4185
Mobile:  402.321.5057
Email:  jemiles@xxxxxxxxxxxxxxx

CONFIDENTIALITY NOTICE: The contents of this email are confidential
and for the exclusive use of the intended recipient. If you receive this
email in error, please delete it from your system immediately and 
notify us either by email, telephone or fax. You should not copy,
forward, or otherwise disclose the content of the email.