Wireshark · Wireshark-dev: Re: [Wireshark-dev] nmake -f Makefile.nmake all is failing

[Satish Srirama <ssn_wireshark@xxxxxxxxx>]

Hi Abhik and JC,
    Thank you very much for your suggestions. I installed flex again and updated the cygwin and it did help to some extent as the command ran for 20 more minutes. But then the CreateProcessA failed, errno 13 occured again :(
    In fact my cygwin also causing the same error when I am starting the bash. I googled a lot but could not find a solution for it. The only solution seems to be that I need to reinstall cygwin. I removed all the contents, installed and tried to run cygwin again. Only the first time that cywin runs with out causing the bash error. when I close and run it next time, the error starts  appearing. Any suggestions?
Regards,
Satish

----- Original Message ----
From: Abhik Sarkar <sarkar.abhik@xxxxxxxxx>
To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
Sent: Thursday, February 7, 2008 6:40:55 AM
Subject: Re: [Wireshark-dev] nmake -f Makefile.nmake all is failing

Well, the original output Satish posted did give this error:
        bison  -d -p ascend ascend-grammar.y -o ascend-grammar.c
        bash -o igncr ...\tools\runlex.sh "flex" -oascend-scanner.c ascend-scanne
r.l
  15432 [main] bash 2588 fork: child -1 - CreateProcessA failed, errno 13
../tools/runlex.sh: fork: Permission denied
flex: could not create

So, Satish looks like you need to check your environment a bit more.

On Feb 6, 2008 6:28 PM, J.C. Wren <jcwren@xxxxxxxxxx> wrote:
> ascend-scanner.c is produced by flex.  As the make reported, the C
> compiler can't find ascend-scanner.c, so likely flex was unhappy and
> there was a silent error.  Have you updated your cygwin tools
> recently?  I know that flex-2.5.4 works, as that's what's installed on
> my machine.
>
> I would suggest running http://cygwin.com/setup.exe and making sure
> everything is up to date.  If you just click through, it'll do
> everything for you.
>
> --jc
>
>
> On Feb 6, 2008 8:50 AM, Satish Srirama <ssn_wireshark@xxxxxxxxx> wrote:
> >
> > Hi Anders and Abhik,
> >    Thank you very much for your replys. I have tried with distclean, then
> > checkout the code again and tried to distclean and 'nmake -f Makefile.nmake
> > all'. Still I could not make it work.
> >    I tried to download wireshark-0.99.7 and tried to build again.
> > Surprisingly I got the same error.
> >
> > ascend-grammar.c
> > ascend-scanner.c
> > c1 : fatal error C1083: Cannot open source file: 'ascend-scanner.c': No such
> > fil
> > e or directory
> > k12text.c
> > Generating Code...
> > Compiling...
> > file_util.c
> > Generating Code...
> > NMAKE : fatal error U1077: '"C:\Program Files\Microsoft Visual Studio
> > 8\VC\BIN\c
> > l.EXE"' : return code '0x2'
> > Stop.
> > NMAKE : fatal error U1077: '"C:\Program Files\Microsoft Visual Studio
> > 8\VC\BIN\n
> > make.exe"' : return code '0x2'
> > Stop.
> >
> >
> > Any suggestions? Could there be a trouble with my setup, in general. I am
> > using cygwin, python24 .. In this regard I am sending my verify_tools report
> >
> > C:\wireshark-0.99.7>nmake -f Makefile.nmake verify_tools
> >
> > Microsoft (R) Program Maintenance Utility Version 8.00.50727.42
> > Copyright (C) Microsoft Corporation.  All rights reserved.
> >
> > Checking for required applications:
> >        cl: /cygdrive/c/Program Files/Microsoft Visual Studio 8/VC/BIN/cl
> >        link: /cygdrive/c/Program Files/Microsoft Visual Studio
> > 8/VC/BIN/link
> >        nmake: /cygdrive/c/Program Files/Microsoft Visual Studio
> > 8/VC/BIN/nmake
> >
> >        bash: /usr/bin/bash
> >        bison: /usr/bin/bison
> >        flex: /usr/bin/flex
> >        env: /usr/bin/env
> >        grep: /usr/bin/grep
> >        /usr/bin/find: /usr/bin/find
> >        perl: /usr/bin/perl
> >        C:/python24/python.exe: /cygdrive/c/python24/python.exe
> >        sed: /usr/bin/sed
> >        unzip: /usr/bin/unzip
> >        wget: /usr/bin/wget
> >
> > Thanks & Regards,
> > Satish
> >
> >
> >
> > ----- Original Message ----
> > From: Anders Broman <anders.broman@xxxxxxxxxxxx>
> > To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
> > Sent: Wednesday, February 6, 2008 12:38:41 PM
> > Subject: Re: [Wireshark-dev] nmake -f Makefile.nmake all is failing
> >
> >  Hi,
> > Start off with a distclean...
> > /Anders
> >
> > -----Original Message-----
> > From: wireshark-dev-bounces@xxxxxxxxxxxxx
> > [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Abhik Sarkar
> > Sent: den 6 februari 2008 12:35
> > To: Developer support list for Wireshark
> > Subject: Re: [Wireshark-dev] nmake -f Makefile.nmake all is failing
> >
> > Hi Satish,
> >
> > Did you get the sources from a tarball or by checking it out from svn.
> > If it was from svn, you might want to update and try again.
> >
> > Hope this helps
> > Abhik.
> >
> > On Feb 6, 2008 3:16 PM, Satish Srirama <ssn_wireshark@xxxxxxxxx> wrote:
> > >
> > > Hi All,
> > >    I am new to wireshark development. I am trying to establish the
> > > build setup from source code and I am following the developer
> > > guidelines. I am getting the following error when I am working with
> > > the command "nmake -f Makefile.nmake all". The snapshot of the details
> >
> > > are : Further details can be provided at request.  Can anyone help me?
> >
> > > I also tried to distclean again but the error persists. Thanks in
> > advance.
> > >
> > >    Microsoft (R) Program Maintenance Utility Version 8.00.50727.42
> > > Copyright (C) Microsoft Corporation.  All rights reserved.
> > >
> > >        bison  -d -p ascend ascend-grammar.y -o ascend-grammar.c
> > >        bash -o igncr ....\tools\runlex.sh "flex" -oascend-scanner.c
> > > ascend-scanne r.l
> > >  15432 [main] bash 2588 fork: child -1 - CreateProcessA failed, errno
> >
> > > 13
> > > ..../tools/runlex.sh: fork: Permission denied
> > > flex: could not create
> > >        bash -o igncr ....\tools\runlex.sh "flex" -ok12text.c k12text.l
> > >    514 [main] bash 2980 fork: child -1 - CreateProcessA failed, errno
> >
> > > 13
> > > ..../tools/runlex.sh: fork: Permission denied
> > >        rc  /r ....\image\wiretap.rc
> > >        cl -DWIN32 -DNULL=0 -D_MT -D_DLL -WX -DYYMALLOC=malloc
> > > -DYYFREE=free -DH AVE_CONFIG_H /I. /I..
> > > /IC:\wireshark-win32-libs\glib\include\glib-2.0
> > > /IC:\wir
> > > eshark-win32-libs\glib\lib\glib-2.0\include
> > > /IC:\wireshark-win32-libs\zlib123\in
> > > clude /IC:\wireshark-win32-libs\WPdpack/include  -D_U_="" /Zi /W3 /MD
> > > /D_CRT_SEC URE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE
> > > /DMSC_VER_REQUIRED=1400 -Fd.\ -c 5v iews.c airopeek9.c ascend.c atm.c
> > > ber.c btsnoop.c buffer.c catapult_dct2000.c co mmview.c cosine.c
> > > csids.c dbs-etherwatch.c erf.c etherpeek.c eyesdn.c file_acces s.c
> > > file_wrappers.c hcidump.c i4btrace.c iptrace.c iseries.c k12.c
> > > lanalyzer.c l ibpcap.c mpeg.c mpeg-audio.c netmon.c netscreen.c
> > > nettl.c network_instruments.c netxray.c ngsniffer.c pcapng.c pppdump.c
> >
> > > radcom.c snoop.c toshiba.c visual.c vms ...c wtap.c ascend-grammar.c
> > > ascend-scanner.c k12text.c file_util.c Microsoft (R) 32-bit C/C++
> > > Optimizing Compiler Version 14.00.50727.42 for
> > > 80x86
> > > Copyright (C) Microsoft Corporation.  All rights reserved.
> > >
> > > 5views.c
> > > airopeek9.c
> > > ascend.c
> > > atm.c
> > > ber.c
> > > btsnoop.c
> > > buffer.c
> > > catapult_dct2000.c
> > > commview.c
> > > cosine.c
> > > csids.c
> > > dbs-etherwatch.c
> > > erf.c
> > > etherpeek.c
> > > eyesdn.c
> > > file_access.c
> > > file_wrappers.c
> > > hcidump.c
> > > i4btrace.c
> > > iptrace.c
> > > Generating Code...
> > > Compiling...
> > > iseries.c
> > > k12.c
> > > lanalyzer.c
> > > libpcap.c
> > > mpeg.c
> > > mpeg-audio.c
> > > netmon.c
> > > netscreen.c
> > > nettl.c
> > > network_instruments.c
> > > netxray.c
> > > ngsniffer.c
> > > pcapng.c
> > > pppdump.c
> > > radcom.c
> > > snoop.c
> > > toshiba.c
> > > visual.c
> > > vms.c
> > > wtap.c
> > > Generating Code...
> > > Compiling...
> > > ascend-grammar.c
> > > ascend-scanner.c
> > > c1 : fatal error C1083: Cannot open source file: 'ascend-scanner.c':
> > > No such fil e or directory k12text.c
> > > k12text.l(65) : fatal error C1083: Cannot open include file:
> > > 'k12text_lex.h': No
> > >  such file or directory
> > > file_util.c
> > > Generating Code...
> > > NMAKE : fatal error U1077: '"C:\Program Files\Microsoft Visual Studio
> > > 8\VC\BIN\c l.EXE"' : return code '0x2'
> > > Stop.
> > > NMAKE : fatal error U1077: '"C:\Program Files\Microsoft Visual Studio
> > > 8\VC\BIN\n make.exe"' : return code '0x2'
> > > Stop.
> > >
> > >
> > > Regards,
> > > Satish Srirama
> > >
> > >  ________________________________
> > > Looking for last minute shopping deals? Find them fast with Yahoo!
> > Search.
> > > _______________________________________________
> > > Wireshark-dev mailing list
> > > Wireshark-dev@xxxxxxxxxxxxx
> > > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> > >
> > >
> > _______________________________________________
> > Wireshark-dev mailing list
> > Wireshark-dev@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> > _______________________________________________
> > Wireshark-dev mailing list
> > Wireshark-dev@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> >
> >
> >  ________________________________
> > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it
> > now.
> > _______________________________________________
> > Wireshark-dev mailing list
> > Wireshark-dev@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> >
> >
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
>
_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev

---

Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.