No, it should work fine.
I have just tested the latest version myself and it decodes all my
isns packets just fine.
Have you checked that you do have packets coming/going to tcp port
3205 which is used for isns?
Try the display filter "tcp.port==3205"
Can you verify that the isns protocol is not disabled in
Analyze:/EnabledProtocols
Can you make sure that you do NOT have TCP reassembly enabled in
Edit:/Preferences/Protocols/TCP
If you do have isns traffic in the trace but Ethereal does not show it, can you
send me a cvapture file that does contain isns and where ethereal
fails to show the packets as isns so i can look at it?
On Thu, 2 Dec 2004 10:34:58 -0600, Lee Xing <lxing@xxxxxxxxxxxxxx> wrote:
> I didn't see any iSNS under 'Protocol' column. Ethereal I'm using is ethereal-setup-0.10.7.exe and WinPcap_3_0.exe. Do I need to do some setup/configure to let them decode iSNS packages?
>
> Thanks,
>
>
> Lee
>
>
>
> -----Original Message-----
> From: ethereal-users-bounces@xxxxxxxxxxxx
> [mailto:ethereal-users-bounces@xxxxxxxxxxxx]On Behalf Of ronnie sahlberg
> Sent: Thursday, December 02, 2004 4:04 AM
> To: Ethereal user support
> Subject: Re: [Ethereal-users] Ethereal and iSNS
>
> it decodes isns on my machine.
>
> do you have an example capture to show where it does not decode isns properly?
>
> On Wed, 1 Dec 2004 19:24:49 -0600, Lee Xing <lxing@xxxxxxxxxxxxxx> wrote:
> > Hi,
> >
> > It seems the current Ethereal does not interpret iSNS protocol any more. If I remember right, it did before. What I could miss?
> >
> > Thanks,
> >
> > Lee
> >
> > _______________________________________________
> > Ethereal-users mailing list
> > Ethereal-users@xxxxxxxxxxxx
> > http://www.ethereal.com/mailman/listinfo/ethereal-users
> >
>
> _______________________________________________
>
>
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
>
