Ethereal-users: Re: [Ethereal-users] One-Way Capture 0.9.5

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: Steve Currie <curries@xxxxxxxxxxx>
Date: Wed, 21 Aug 2002 14:48:44 -0400
I've done a little more investigation.  I downloaded 0.9.6 and found the
same issue can be replicated.  The problem can be replicated on yet one more
PC using a Cisco Aironet card.  I connected the first PC directly to a
switched Ethernet segment and the tracing worked correctly - I could see
both inbound and outbound traffic.  Does Ethereal and winPcap only support
Ethernet interfaces?

----- Original Message -----
From: "Steve Currie" <curries@xxxxxxxxxxx>
To: <ethereal-users@xxxxxxxxxxxx>
Sent: Tuesday, August 20, 2002 10:28 PM
Subject: [Ethereal-users] One-Way Capture 0.9.5


> When I capture traffic I see only traffic destined for my NIC.  The
outbound
> requests do not appear.  I have no filters enabled.  I am using ethereal
> 0.9.5 on Win2K with winPcap 2.3 (latest non-beta version).  I observed the
> same behavior with 0.9.4 and 2.1.  I observed the same behavior on two
> different PCs with different NICs, media, etc.  The NICs were Compaq
PCMCIA
> token ring (not sure of exact model), IBM turbo 16/4 PCMCIA token ring,
and
> Cisco Aironet 350.  Any thoughts or ideas?
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users