Ethereal-dev: [Ethereal-dev] Read filter using eth.len seems to be buggy.

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: Daniel Shane <daniel.shane@xxxxxxxxx>
Date: Tue, 20 Nov 2001 13:11:07 -0500
Hi all,

I think there is a problem with the eth.len read filter, but since I did not
have the time to trace it or to check the source code yet, I thought I would
first of all ask this list to see if this is normal and/or if you can arrive
at the same results as my test.

test done using ethereal v. 0.8.20
-----------------------------------

Test1:

Machine1# ping Machine2
  64 bytes from 192.168.1.1: icmp_seq=0...
  ...

Machine2# tethereal -R "eth.dst == 00:00:0c:53:43:2b"
device eth0 entering promisc. mode
Capturing on eth0
  1.5900000  192.168.1.20 -> 192.168.1.1  ICMP Echo (ping) request
  2.5900000  192.168.1.20 -> 192.168.1.1  ICMP Echo (ping) request

The eth.dst works fine. Now I will add eth.len to this:

Machine1# ping Machine2
  64 bytes from 192.168.1.1: icmp_seq=0...
  ...

Machine2# tethereal -R "eth.dst == 00:00:0c:53:43:2b and eth.len > 1"
device eth0 entering promis. mode
Capturing eth0
<nothing>

Humm... I dare to say that just about 99.999% (even 100% maybe?) of ethernet
packets should have len > 1?

Is this normal?

Thanks in advance!
Daniel Shane

----
Daniel Shane (daniel.shane NOSPAM@xxxxxxxxx)
GNU/Linux developer 
Eicon Networks (www.eicon.com)