Display Filter Reference: ZigBee ZCL Power Configuration
Protocol field name: zbee_zcl_general.power_config
Versions: 2.0.0 to 3.4.5
Back to Display Filter Reference
Field name | Description | Type | Versions |
---|---|---|---|
zbee_zcl_general.power_config.attr.batt_AHr | Battery Capacity | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_alarm_mask | Battery Alarm Mask | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_alarm_mask.reserved | Reserved | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_percentage | Remaining Battery Percentage | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_rated_voltage | Battery Rated Voltage | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_type | Battery Type | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_voltage | Measured Battery Voltage | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.batt_voltage_min_thr | Battery Voltage Minimum Threshold | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_alarm_mask | Mains Alarm Mask | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_alarm_mask.mains_too_high | Mains Voltage too high | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_alarm_mask.mains_too_low | Mains Voltage too low | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_alarm_mask.reserved | Reserved | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_dwell_tp | Mains Voltage Dwell Trip Point | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_frequency | Measured Mains Frequency | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_volt_max | Mains Voltage Maximum Threshold | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_volt_min | Mains Voltage Minimum Threshold | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr.mains_voltage | Measured Mains Voltage | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.attr_id | Attribute | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
zbee_zcl_general.power_config.batt_attr.alarm_mask.batt_too_low | Battery Voltage too low | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance