Display Filter Reference: WiMax REG-REQ/RSP Messages
Protocol field name: wmx.reg
Versions: 1.0.0 to 1.10.14
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| wimax.reg.bandwidth_request_ul_tx_pwr_report_header_support | Bandwidth request and UL Tx Power Report header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.block_lifetime | ARQ Block Lifetime (10us granularity) | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.block_size | ARQ Block Size | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.deliver_in_order | ARQ Deliver In Order | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.arq.enable | ARQ Enable | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.arq.max_block_size | ARQ Maximum Block Size | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.arq.min_block_size | ARQ Minimum Block Size | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.arq.receiver_delay | ARQ Receiver Delay (10us granularity) | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.rx_purge_timeout | ARQ RX Purge Timeout (100us granularity) | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.sync_loss_timeout | ARQ Sync Loss Timeout (10us granularity) | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.transmitter_delay | ARQ Transmitter Delay (10us granularity) | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.arq.window_size | ARQ Window Size | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.macmgtmsgtype.reg_req | MAC Management Message Type | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.macmgtmsgtype.reg_rsp | MAC Management Message Type | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.alloc_sec_mgmt_dhcp | DHCP | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.alloc_sec_mgmt_dhcpv6 | DHCPv6 | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.alloc_sec_mgmt_ipv6 | IPv6 Stateless Address Autoconfiguration | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.alloc_sec_mgmt_mobile_ipv4 | Mobile IPv4 | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.alloc_sec_mgmt_rsvd | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.arq | ARQ support | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.arq_ack_type_cumulative_ack_entry | Cumulative ACK entry | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.arq_ack_type_cumulative_ack_with_block_sequence_ack | Cumulative ACK with Block Sequence ACK | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.arq_ack_type_cumulative_with_selective_ack_entry | Cumulative with Selective ACK entry | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.arq_ack_type_reserved | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.arq_ack_type_selective_ack_entry | Selective ACK entry | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.bandwidth_request_cinr_report_header_support | Bandwidth request and CINR report header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.bandwidth_request_ul_sleep_control_header_support | Bandwidth request and uplink sleep control header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.cqich_allocation_request_header_support | CQICH Allocation Request header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.dl_cids_supported | Number of Downlink transport CIDs the SS can support | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.dl_sleep_control_extended_subheader | Downlink sleep control extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.dsx_flow_control | DSx flow control | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.encap_802_1q | Packet, 802.1Q VLAN | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_802_3 | Packet, 802.3/Ethernet | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_atm | ATM | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_ipv4 | Packet, IPv4 | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_ipv4_802_1q | Packet, IPv4 over 802.1Q VLAN | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_ipv4_802_3 | Packet, IPv4 over 802.3/Ethernet | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_ipv6 | Packet, IPv6 | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_ipv6_802_1q | Packet, IPv6 over 802.1Q VLAN | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_ipv6_802_3 | Packet, IPv6 over 802.3/Ethernet | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_packet_802_3_ethernet_and_ecrtp_header_compression | Packet, 802.3/Ethernet (with optional 802.1Q VLAN tags) and ECRTP header compression | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_packet_802_3_ethernet_and_rohc_header_compression | Packet, 802.3/Ethernet (with optional 802.1Q VLAN tags) and ROHC header compression | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_packet_ip_ecrtp_header_compression | Packet, IP (v4 or v6) with ECRTP header compression | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_packet_ip_rohc_header_compression | Packet, IP (v4 or v6) with ROHC header compression | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.encap_rsvd | Reserved | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.ext_rtps_support | MAC extended rtPS support | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.fbss_mdho_dl_rf_combining | FBSS/MDHO DL RF Combining with monitoring MAPs from active BSs | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.fbss_mdho_ho_disable | MDHO/FBSS HO. BS ignore all other bits when set to 1 | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.feedback_header_support | Feedback header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.feedback_request_extended_subheader | Feedback request extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.handover_indication_readiness_timer | Handover indication readiness timer | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.handover_reserved | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.ho_connections_param_processing_time | MS HO connections parameters processing time | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.ho_process_opt_ms_timer | HO Process Optimization MS Timer | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.ho_tek_processing_time | MS HO TEK processing time | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.idle_mode_timeout | Idle Mode Timeout | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.ip_mgmt_mode | IP management mode | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.ip_version | IP version | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.mac_address | MAC Address of the SS | Ethernet or other MAC address | 1.0.0 to 1.10.14 |
| wmx.reg.mac_crc_support | MAC CRC | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.max_classifiers | Maximum number of classification rules | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.max_num_bursts_to_ms | Maximum number of bursts transmitted concurrently to the MS | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.mca_flow_control | MCA flow control | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.mcast_polling_cids | Multicast polling group CID support | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.mdh_ul_multiple | MDHO UL Multiple transmission | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.mdho_dl_monitor_maps | MDHO DL soft combining with monitoring MAPs from active BSs | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.mdho_dl_monitor_single_map | MDHO DL soft Combining with monitoring single MAP from anchor BS | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.mimo_mode_feedback_request_extended_subheader | MIMO mode feedback request extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.mini_feedback_extended_subheader | Mini-feedback extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.mobility_handover | Mobility (handover) | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.mobility_idle_mode | Idle mode | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.mobility_sleep_mode | Sleep mode | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.multi_active_power_saving_classes | Multiple active power saving classes supported | Boolean | 1.2.0 to 1.10.14 |
| wmx.reg.packing.support | Packing support | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.pdu_sn_long_extended_subheader | PDU SN (long) extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.pdu_sn_short_extended_subheader | PDU SN (short) extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.phs | PHS support | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg.phy_channel_report_header_support | PHY channel report header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.power_saving_class_type_i | Power saving class type I supported | Boolean | 1.2.0 to 1.10.14 |
| wmx.reg.power_saving_class_type_ii | Power saving class type II supported | Boolean | 1.2.0 to 1.10.14 |
| wmx.reg.power_saving_class_type_iii | Power saving class type III supported | Boolean | 1.2.0 to 1.10.14 |
| wmx.reg.reserved | Reserved | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.sdu_sn_extended_subheader_support | SDU_SN extended subheader support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.sdu_sn_parameter | SDU_SN parameter | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.sn_report_header_support | SN report header support | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.sn_request_extended_subheader | SN request extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.ss_mgmt_support | SS management support | Boolean | 1.0.0 to 1.10.14 |
| wmx.reg.ul_cids_supported | Number of Uplink transport CIDs the SS can support | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.ul_tx_power_report_extended_subheader | UL Tx power report extended subheader | Unsigned integer, 3 bytes | 1.0.0 to 1.10.14 |
| wmx.reg.unknown_tlv_type | Unknown TLV Type | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.reg_req.invalid_tlv | Invalid TLV | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.reg_req.max_mac_dl_data | Maximum MAC level DL data per frame | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_req.max_mac_ul_data | Maximum MAC level UL data per frame | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_req.min_time_for_inter_fa | Minimum time for inter-FA HO, default=3 | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg_req.min_time_for_intra_fa | Minimum time for intra-FA HO, default=2 | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg_req.ms_periodic_ranging_timer_info | MS periodic ranging timer information | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg_req.ms_prev_ip_addr_v4 | MS Previous IP address | IPv4 address | 1.0.0 to 1.10.14 |
| wmx.reg_req.ms_prev_ip_addr_v6 | MS Previous IP address | IPv6 address | 1.0.0 to 1.10.14 |
| wmx.reg_req.secondary_mgmt_cid | Secondary Management CID | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_req.sleep_recovery | Frames required for the MS to switch from sleep to awake-mode | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg_req.total_power_saving_class_instances | Total number of power saving class instances of all | Unsigned integer, 2 bytes | 1.2.0 to 1.10.14 |
| wmx.reg_rsp.invalid_tlv | Invalid TLV | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.reg_rsp.new_cid_after_ho | New CID after handover to new BS | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_rsp.response | Response | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.reg_rsp.secondary_mgmt_cid | Secondary Management CID | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_rsp.service_flow_id | Service flow ID | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_rsp.system_resource_retain_time | System Resource Retain Time | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.reg_rsp.tlv_value | Value | Sequence of bytes | 1.0.0 to 1.8.15 |
| wmx.reg_rsp.total_provisional_sf | Total Number of Provisional Service Flow | Unsigned integer, 1 byte | 1.2.0 to 1.10.14 |
| wmx.reg_rsp.unknown_tlv_type | Unknown TLV Type | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.authorization_token | Authorization Token | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.cid | CID | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.cid_alloc_for_active_bs | CID Allocation For Active BSs | Sequence of bytes | 1.0.0 to 1.8.15 |
| wmx.sfe.cid_alloc_for_active_bs_cid | CID | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.cs_specification | CS Specification | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.fixed_len_sdu | Fixed/Variable Length SDU | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.fsn_size | FSN Size | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.global_service_class_name | Global Service Class Name | Character string | 1.0.0 to 1.10.14 |
| wmx.sfe.harq_channel_mapping | HARQ Channel Mapping | Sequence of bytes | 1.0.0 to 1.8.15 |
| wmx.sfe.harq_channel_mapping.index | HARQ Channel Index | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.harq_service_flows | HARQ Service Flows | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.jitter | Tolerated Jitter | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.max_latency | Maximum Latency | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.max_traffic_burst | Maximum Traffic Burst | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.mbs_contents_ids | MBS contents IDs | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.mbs_contents_ids_id | MBS Contents ID | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.mbs_service | MBS Service | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.mbs_zone_identifier | MBS Zone Identifier | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.mrr | Minimum Reserved Traffic Rate | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.msr | Maximum Sustained Traffic Rate | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.paging_preference | Paging Preference | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.pdu_sn_ext_subheader_reorder | PDU SN Extended Subheader For HARQ Reordering | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.bit1 | The Service Flow Shall Not Use Multicast Bandwidth Request Opportunities | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.broadcast_bwr | The Service Flow Shall Not Use Broadcast Bandwidth Request Opportunities | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.crc | The Service Flow Shall Not Include CRC In The MAC PDU | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.fragment | The Service Flow Shall Not Fragment Data | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.headers | The Service Flow Shall Not Suppress Payload Headers | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.packing | The Service Flow Shall Not Pack Multiple SDUs (Or Fragments) Into Single MAC PDUs | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.piggyback | The Service Flow Shall Not Piggyback Requests With Data | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.policy.rsvd1 | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.qos_params_set | QoS Parameter Set Type | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.qos_params_set.active | Active Set | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.qos_params_set.admitted | Admitted Set | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.qos_params_set.provisioned | Provisioned Set | Boolean | 1.0.0 to 1.10.14 |
| wmx.sfe.qos_params_set.rsvd | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.req_tx_policy | Request/Transmission Policy | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.reserved_10 | Reserved | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.reserved_34 | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.reserved_36 | Reserved | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.sdu_inter_arrival_interval | SDU Inter-Arrival Interval (in the resolution of 0.5 ms) | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.sdu_size | SDU Size | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.service_class_name | Service Class Name | Character string | 1.0.0 to 1.10.14 |
| wmx.sfe.sf_id | Service Flow ID | Unsigned integer, 4 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.sn_feedback_enabled | SN Feedback | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.target_said | SAID Onto Which SF Is Mapped | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.time_base | Time Base | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.traffic_priority | Traffic Priority | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.type_of_data_delivery_services | Type of Data Delivery Services | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| wmx.sfe.unknown_type | Unknown SFE TLV type | Sequence of bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.unsolicited_grant_interval | Unsolicited Grant Interval | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.unsolicited_polling_interval | Unsolicited Polling Interval | Unsigned integer, 2 bytes | 1.0.0 to 1.10.14 |
| wmx.sfe.uplink_grant_scheduling | Uplink Grant Scheduling Type | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance