Display Filter Reference: USB HUB
Protocol field name: usbhub
Versions: 1.4.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| usbhub.change.port | Port Change | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| usbhub.change.port.connection | C_PORT_CONNECTION | Boolean | 1.10.0 to 3.4.5 |
| usbhub.change.port.enable | C_PORT_ENABLE | Boolean | 1.10.0 to 3.4.5 |
| usbhub.setup.bRequest | bRequest | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.DescriptorIndex | DescriptorIndex | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.DescriptorLength | DescriptorLength | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.DescriptorType | DescriptorType | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.Dev_Addr | Dev_Addr | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.EP_Num | EP_Num | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.HubFeatureSelector | HubFeatureSelector | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.Port | Port | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.PortFeatureSelector | PortFeatureSelector | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.PortSelector | PortSelector | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.TT_Flags | TT_Flags | Unsigned integer, 1 byte | 1.4.0 to 3.4.5 |
| usbhub.setup.TT_Port | TT_Port | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.TT_StateLength | TT State Length | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.wIndex | wIndex | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.wLength | wLength | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.wValue | wValue | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.setup.zero | (zero) | Unsigned integer, 2 bytes | 1.4.0 to 3.4.5 |
| usbhub.status.port | Port Status | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| usbhub.status.port.connection | PORT_CONNECTION | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.enable | PORT_ENABLE | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.high_speed | PORT_HIGH_SPEED | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.indicator | PORT_INDICATOR | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.low_speed | PORT_LOW_SPEED | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.overcurrent | PORT_OVER_CURRENT | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.power | PORT_POWER | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.reset | PORT_RESET | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.suspend | PORT_SUSPEND | Boolean | 1.10.0 to 3.4.5 |
| usbhub.status.port.test | PORT_TEST | Boolean | 1.10.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance