Display Filter Reference: SliMP3 Communication Protocol
Protocol field name: slimp3
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| slimp3.code_bits | Code bits | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| slimp3.code_id | Code identifier | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| slimp3.control | Control Packet | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| slimp3.data | Data | Boolean | 1.0.0 to 1.8.15 |
| slimp3.data.command | Command | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| slimp3.data.data | Data | Sequence of bytes | 2.0.0 to 3.4.5 |
| slimp3.data.length | Length | Sequence of bytes | 2.0.0 to 3.4.5 |
| slimp3.data.offset | Buffer offset | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.data.sequence | Sequence | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.data.write_pointer | Write Pointer | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.data_ack | Data Ack | Boolean | 1.0.0 to 1.8.15 |
| slimp3.data_ack.read_pointer | Read Pointer | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.data_ack.sequence | Sequence | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.data_ack.write_pointer | Write Pointer | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.data_req | Data Request | Boolean | 1.0.0 to 1.8.15 |
| slimp3.data_req.offset | Requested offset | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.device_id | Device ID | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| slimp3.disc_rsp.server_ip | Server Address | IPv4 address | 1.10.0 to 3.4.5 |
| slimp3.disc_rsp.server_port | Server Port | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| slimp3.discovery_req | Discovery Request | Boolean | 1.0.0 to 1.8.15 |
| slimp3.discovery_response | Discovery Response | Boolean | 1.0.0 to 1.8.15 |
| slimp3.display | Display | Boolean | 1.0.0 to 1.8.15 |
| slimp3.display_command | Command | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| slimp3.display_delay | Delay | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| slimp3.display_string | String | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
| slimp3.display_unknown | Unknown | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
| slimp3.fw_rev | Firmware Revision | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| slimp3.hello | Hello | Boolean | 1.0.0 to 1.8.15 |
| slimp3.hello_request_server_client | Hello Request (Server --> Client) | Label | 2.0.0 to 3.4.5 |
| slimp3.hello_response_client_server | Hello Response (Client --> Server) | Label | 2.0.0 to 3.4.5 |
| slimp3.i2c | I2C | Boolean | 1.0.0 to 1.8.15 |
| slimp3.i2c_request_server_client | I2C Request (Server --> Client) | Label | 2.0.0 to 3.4.5 |
| slimp3.i2c_response_client_server | I2C Response (Client --> Server) | Label | 2.0.0 to 3.4.5 |
| slimp3.infrared | Infrared Code | Unsigned integer, 4 bytes | 1.10.0 to 3.4.5 |
| slimp3.ir | Infrared | Unsigned integer, 4 bytes | 1.0.0 to 1.8.15 |
| slimp3.opcode | Opcode | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| slimp3.uptime | Uptime | Unsigned integer, 4 bytes | 1.10.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance