Display Filter Reference: Signaling Compression
Protocol field name: sigcomp
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| sigcomp.accessing_state | ### Accessing state ### | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.addr | Addr | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.addr.output.start | %Output_start[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.all_remaining_parameters | All remaining parameters = 0(Not in the uploaded code as UDVM buffer initialized to Zero | Label | 2.0.0 to 3.4.5 |
| sigcomp.byte_code_length | Byte code length | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.byte_copy | byte copy | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.calculated_sha_1 | Calculated SHA-1 | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.code.len | Code length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.compression-ratio | Compression ratio (%) | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| sigcomp.copying_bytes_literally | Copying bytes literally | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.copying_value | Copying value | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.creating_state | ### Creating state ### | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.current_instruction | Addr | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.data_for_sigcomp_dissector | Data handed to the Sigcomp dissector | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.decompress_instruction | Instruction | Label | 2.0.0 to 3.4.5 |
| sigcomp.decompression_failure | DECOMPRESSION-FAILURE | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
| sigcomp.decompression_failure_expert | DECOMPRESSION FAILURE | Label | 2.2.0 to 3.4.5 |
| sigcomp.destination | Destination | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.end_of_sigcomp_message_indication_found | End of SigComp message indication found | Label | 2.0.0 to 3.4.5 |
| sigcomp.escape_digit_found | Escape digit found | Label | 2.0.0 to 3.4.5 |
| sigcomp.execution_of_this_instruction_is_not_implemented | Execution of this instruction is NOT implemented | Label | 2.0.0 to 3.4.5 |
| sigcomp.failed_to_access_state_wireshark_udvm_diagnostic | Failed to Access state Wireshark UDVM diagnostic | Label | 2.0.0 to 3.4.5 |
| sigcomp.getting_value | Getting value | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.illegal_escape_code | Illegal escape code | Label | 2.0.0 to 3.4.5 |
| sigcomp.instruction_code | Instruction code | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.invalid_instruction | Invalid instruction | Label | 2.0.0 to 3.4.5 |
| sigcomp.invalid_shift_value | Invalid shift value | Label | 2.0.13 to 2.0.16, 2.2.7 to 3.4.5 |
| sigcomp.length | Partial state id length | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.load_bytecode_into_udvm_start | Load bytecode into UDVM starting at | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.loading_h | Loading H | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.loading_result | Loading result | Label | 2.0.0 to 3.4.5 |
| sigcomp.loading_value | Loading value | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.max_udvm_cycles | maximum_UDVM_cycles | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
| sigcomp.memory_size | Memory size | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.message_decompressed | SigComp message Decompressed | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.message_decompression_failure | SigComp message Decompression failure | Label | 2.0.0 to 3.4.5 |
| sigcomp.message_length | Message Length | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.min.acc.len | %Minimum access length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.nack.cycles_per_bit | Cycles Per Bit | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.nack.failed_op_code | OPCODE of failed instruction | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.nack.failed_op_code.expert | SigComp NACK | Label | 1.12.0 to 3.4.5 |
| sigcomp.nack.pc | PC of failed instruction | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.nack.reason | Reason Code | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.nack.sha1 | SHA-1 Hash of failed message | Sequence of bytes | 1.0.0 to 3.4.5 |
| sigcomp.nack.state_id | State ID (6 - 20 bytes) | Sequence of bytes | 1.0.0 to 3.4.5 |
| sigcomp.nack.ver | NACK Version | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.num_state_create | no_of_state_create | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
| sigcomp.output.length | %Output_length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.output.length.addr | %Output_length[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.output.start | %Output_start | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.output_value | Output value | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.partial.state.identifier | Partial state identifier | Character string | 1.0.0 to 3.4.5 |
| sigcomp.remaining-bytes | Remaining SigComp message bytes | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| sigcomp.remaining_bytes | Remaining bytes | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.remaining_sigcomp_message | Remaining SigComp message | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.req.feedback.loc | %Requested feedback location | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.ret.param.loc | %Returned parameters location | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.returned.feedback.item | Returned_feedback item | Sequence of bytes | 1.0.0 to 3.4.5 |
| sigcomp.returned.feedback.item.len | Returned feedback item length | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.set_hu | Set Hu | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.sha1_digest | SHA1 digest | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.sha1buff | sha1buff | Sequence of bytes | 2.0.0 to 3.4.5 |
| sigcomp.starting_to_remove_escape_digits | Starting to remove escape digits | Label | 2.0.0 to 3.4.5 |
| sigcomp.state_value | Addr | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.storing_value | Storing value | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.t.bit | T bit | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.tcp_fragment | TCP Fragment | Label | 2.0.0 to 3.4.5 |
| sigcomp.udvm.addr.destination | %Destination[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.addr.j | %j[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.addr.length | %Length[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.addr.offset | %Offset[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.at.address | @Address(mem_add_of_inst + D) mod 2^16) | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.bits | %Bits | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.byte-code | Uploaded UDVM bytecode | Label | 1.0.0 to 3.4.5 |
| sigcomp.udvm.destination | %Destination | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.execution-trace | UDVM execution trace | Label | 1.0.0 to 3.4.5 |
| sigcomp.udvm.instr | UDVM instruction code | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.udvm.j | %j | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.length | %Length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.lit.bytecode | UDVM bytecode | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.udvm.literal-num | #n | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.lower.bound | %Lower bound | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.multyt.bytecode | UDVM bytecode | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.udvm.offset | %Offset | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.operand | UDVM operand | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| sigcomp.udvm.operand.1 | $Operand 1[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.operand.2 | %Operand 2 | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.operand.2.addr | %Operand 2[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.partial.identifier.length | %Partial identifier length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.partial.identifier.start | %Partial identifier start | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.position | %Position | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.ref.bytecode | UDVM bytecode | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| sigcomp.udvm.ref.destination | $Destination[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.start.address | %State address | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.start.address.addr | %State address[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.start.instr | %State instruction | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.start.value | %Start value | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.state.begin | %State begin | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.state.length | %State length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.state.length.addr | %State length[memory address] | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.state.ret.pri | %State retention priority | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.uncompressed | %Uncompressed | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.upper.bound | %Upper bound | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm.value | %Value | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| sigcomp.udvm_execution_stated | UDVM EXECUTION STARTED | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.udvm_instruction | UDVM instruction | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
| sigcomp.used_udvm_cycles | used_udvm_cycles | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
| sigcomp.wireshark_udvm_diagnostic | Wireshark UDVM diagnostic | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance