Display Filter Reference: Radio Signalling Link (RSL)
Protocol field name: rsl
Versions: 1.0.0 to 1.8.15
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| rsl.a1_0 | A1 | Boolean | 1.0.0 to 1.8.15 |
| rsl.a1_1 | A1 | Boolean | 1.0.0 to 1.8.15 |
| rsl.a2_0 | A1 | Boolean | 1.0.0 to 1.8.15 |
| rsl.a3a2 | A3A2 | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.acc_del | Access Delay | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.act_timing_adv | Actual Timing Advance | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.alg_id | Algorithm Identifier | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.bs_power | Power Level | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.cause | Cause | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.cbch_load_type | CBCH Load Type | Boolean | 1.0.0 to 1.8.15 |
| rsl.ch_ind | Channel Ind | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ch_needed | Channel Needed | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ch_no_Cbits | C-bits | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ch_no_TN | Time slot number (TN) | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ch_rate_and_type | Channel rate and type | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| rsl.ch_type | channel type | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.class | Class | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.cm_dtxd | DTXd | Boolean | 1.0.0 to 1.8.15 |
| rsl.cm_dtxu | DTXu | Boolean | 1.0.0 to 1.8.15 |
| rsl.cmd | Command | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.data_rte | Data rate | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.delay_ind | Delay IND | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.dtxd | DTXd | Boolean | 1.0.0 to 1.8.15 |
| rsl.emlpp_prio | eMLPP Priority | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.epc_mode | EPC mode | Boolean | 1.0.0 to 1.8.15 |
| rsl.extension_bit | Extension | Boolean | 1.0.0 to 1.8.15 |
| rsl.fpc_epc_mode | FPC-EPC mode | Boolean | 1.0.0 to 1.8.15 |
| rsl.ho_ref | Hand-over reference | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ie_id | Element identifier | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ie_length | Length | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.interf_band | Interf Band | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.interf_band_reserved | Interf Band reserved bits | Unsigned integer, 1 byte | 1.6.0 to 1.8.15 |
| rsl.ipacc.conn_id | ip.access Connection ID | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.avg_tx_delay | Average Tx Delay | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.ia_jitter | Inter-arrival Jitter | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.lost_pkts | Packets Lost | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.rx_octets | Octets Received | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.rx_pkts | Packets Received | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.tx_octets | Octets Sent | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.cstat.tx_pkts | Packets Sent | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.local_ip | ip.access Local IP Address | IPv4 address | 1.8.0 to 1.8.15 |
| rsl.ipacc.local_port | ip.access Local RTP Port | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.remote_ip | ip.access Remote IP Address | IPv4 address | 1.8.0 to 1.8.15 |
| rsl.ipacc.remote_port | ip.access Remote RTP Port | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
| rsl.ipacc.rtp_csd_fmt_d | ip.access RTP CSD Format D | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| rsl.ipacc.rtp_csd_fmt_ir | ip.access RTP CSD Format IR | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| rsl.ipacc.rtp_payload | ip.access RTP Payload Type | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| rsl.ipacc.speech_mode_m | ip.access Speech Mode M | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| rsl.ipacc.speech_mode_s | ip.access Speech Mode S | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| rsl.key | KEY | Sequence of bytes | 1.0.0 to 1.8.15 |
| rsl.meas_res_no | Measurement result number | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ms_fpc | FPC/EPC | Boolean | 1.0.0 to 1.8.15 |
| rsl.ms_power_lev | MS power level | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.msg_dsc | Message discriminator | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.msg_type | Message type | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.na | Not applicable (NA) | Boolean | 1.0.0 to 1.8.15 |
| rsl.paging_grp | Paging Group | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.paging_load | Paging Buffer Space | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.phy_ctx | Physical Context | Sequence of bytes | 1.0.0 to 1.8.15 |
| rsl.power_lev | Power level | Unsigned integer, 1 byte | 1.0.0 to 1.2.2 |
| rsl.prio | Priority | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.ra_if_data_rte | Radio interface data rate | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.rach_acc_cnt | RACH Access Count | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.rach_busy_cnt | RACH Busy Count | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.rach_slot_cnt | RACH Slot Count | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.rbit | R | Boolean | 1.0.0 to 1.8.15 |
| rsl.rel_mode | Release Mode | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.req_ref_ra | Random Access Information (RA) | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.req_ref_T1prim | T1\' | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.req_ref_T2 | T2 | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.req_ref_T3 | T3 | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| rsl.rtd | Round Trip Delay (RTD) | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.rxlev_full_up | RXLEV.FULL.up | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.rxlev_sub_up | RXLEV.SUB.up | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.rxqual_full_up | RXQUAL.FULL.up | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.rxqual_sub_up | RXQUAL.SUB.up | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.sapi | SAPI | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.sg_slt_cnt | Message Slot Count | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.speech_coding_alg | Speech coding algorithm | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.speech_or_data | Speech or data indicator | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.sys_info_type | System Info Type | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.T_bit | T bit | Boolean | 1.0.0 to 1.8.15 |
| rsl.t_nt_bit | Transparent indication | Boolean | 1.0.0 to 1.8.15 |
| rsl.tfo | TFO | Boolean | 1.0.0 to 1.8.15 |
| rsl.timing_adv | Timing Advance | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| rsl.timing_offset | Timing Offset | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance