Display Filter Reference: RLC-NR
Protocol field name: rlc-nr
Versions: 2.6.0 to 3.4.5
Back to Display Filter Reference
Field name | Description | Type | Versions |
---|---|---|---|
rlc-nr.am | AM | Character string | 2.6.0 to 3.4.5 |
rlc-nr.am-data.no-data | AM data PDU doesn\'t contain any data | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.ack-sn | ACK Sequence Number | Unsigned integer, 3 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.cpt | Control PDU Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.am.cpt.invalid | RLC Control frame type not handled | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.data | AM Data | Sequence of bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.dc | Data/Control | Boolean | 2.6.0 to 3.4.5 |
rlc-nr.am.e1 | Extension bit 1 | Boolean | 2.6.0 to 3.4.5 |
rlc-nr.am.e2 | Extension bit 2 | Boolean | 2.6.0 to 3.4.5 |
rlc-nr.am.e3 | Extension bit 3 | Boolean | 2.6.0 to 3.4.5 |
rlc-nr.am.header | AM Header | Character string | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-range | NACK range | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-sn | NACK Sequence Number | Unsigned integer, 3 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-sn.ack-same | Status PDU shouldn\'t ACK and NACK the same sequence number | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-sn.ahead-ack | NACK must not be ahead of ACK in status PDU | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-sn.expert | Status PDU reports NACK | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-sn.nack-range | Status PDU should not contain a NACK range with value 0 | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.nack-sn.partial | Status PDU reports NACK (partial) | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.nacks | Number of NACKs | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.p | Polling Bit | Boolean | 2.6.0 to 3.4.5 |
rlc-nr.am.reserved | Reserved | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.am.si | Segmentation Info | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.am.sn | Sequence Number | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.sn.invalid | Invalid sequence number length | Label | 2.6.0 to 3.4.5 |
rlc-nr.am.so | Segment Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.so-end | SO end | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.am.so-start | SO start | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.bearer-id | Bearer Id | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.bearer-type | Bearer Type | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.bytes-after-status-pdu-complete | bytes remaining after Status PDU complete | Label | 2.6.0 to 3.4.5 |
rlc-nr.context | Context | Character string | 2.6.0 to 3.4.5 |
rlc-nr.direction | Direction | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.fragment | RLC-NR fragment | Frame number | 3.2.0 to 3.4.5 |
rlc-nr.fragment.count | Fragment count | Unsigned integer, 4 bytes | 3.2.0 to 3.4.5 |
rlc-nr.fragment.error | Defragmentation error | Frame number | 3.2.0 to 3.4.5 |
rlc-nr.fragment.multipletails | Multiple tail fragments found | Boolean | 3.2.0 to 3.4.5 |
rlc-nr.fragment.overlap | Fragment overlap | Boolean | 3.2.0 to 3.4.5 |
rlc-nr.fragment.overlap.conflict | Conflicting data in fragment overlap | Boolean | 3.2.0 to 3.4.5 |
rlc-nr.fragment.toolongfragment | Fragment too long | Boolean | 3.2.0 to 3.4.5 |
rlc-nr.fragments | RLC-NR fragments | Sequence of bytes | 3.2.0 to 3.4.5 |
rlc-nr.header-only | RLC PDU Header only | Boolean | 2.6.0 to 3.4.5 |
rlc-nr.header-only.expert | RLC PDU SDUs have been omitted | Label | 2.6.0 to 3.4.5 |
rlc-nr.mode | RLC Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.mode.invalid | Unrecognised RLC Mode set | Label | 2.6.0 to 3.4.5 |
rlc-nr.no-per-frame-info | Can\'t dissect NR RLC frame because no per-frame info was attached! | Label | 3.0.0 to 3.4.5 |
rlc-nr.no_per_frame_info | Can\'t dissect NR RLC frame because no per-frame info was attached! | Label | 2.6.0 to 2.6.20 |
rlc-nr.pdu-length | PDU Length | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.reassembled.data | Reassembled payload | Sequence of bytes | 3.2.0 to 3.4.5 |
rlc-nr.reassembled.length | Reassembled RLC-NR length | Unsigned integer, 4 bytes | 3.2.0 to 3.4.5 |
rlc-nr.reassembled_in | Reassembled RLC-NR in frame | Frame number | 3.2.0 to 3.4.5 |
rlc-nr.reserved-bits-not-zero | Reserved bits not zero | Label | 2.6.0 to 3.4.5 |
rlc-nr.seqnum-length | Sequence Number length | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.tm | TM | Character string | 2.6.0 to 3.4.5 |
rlc-nr.tm.data | TM Data | Sequence of bytes | 2.6.0 to 3.4.5 |
rlc-nr.ueid | UEId | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.um | UM | Character string | 2.6.0 to 3.4.5 |
rlc-nr.um-data.no-data | UM data PDU doesn\'t contain any data | Label | 2.6.0 to 3.4.5 |
rlc-nr.um.data | UM Data | Sequence of bytes | 2.6.0 to 3.4.5 |
rlc-nr.um.header | UM Header | Character string | 2.6.0 to 3.4.5 |
rlc-nr.um.reserved | Reserved | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.um.si | Segmentation Info | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.um.sn | Sequence Number | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
rlc-nr.um.sn.invalid | Invalid sequence number length | Label | 2.6.0 to 3.4.5 |
rlc-nr.um.so | Segment Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
rlc-nr.unknown-udp-framing-tag | Unknown UDP framing tag, aborting dissection | Label | 3.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance