Display Filter Reference: Nfapi
Protocol field name: nfapi
Versions: 2.6.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| nfapi.aggregation.level | Aggregation level | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.allocation.prach.flag | Allocation PRACH flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.alt.cqi.table.r12 | altCQI-Table-r12 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.antenna.port | Antenna Port | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.antenna.ports.and.scrambling.identit | Antenna ports and scrambling identity | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.antenna.ports.and.scrambling.identity.flag | Antenna ports and scrambling identity flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.antenna.ports.scrambling.and.layers | Antenna ports scrambling and layers | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.arfcn | ARFCN | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.arfcn.direction | Direction | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.band | Band | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.bandwidth | Bandwidth | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.bsic | BSIC | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.bw.configuration | Bandwidth configuration | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.carrier.indicator | Carrier Indicator | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.cce.index | CCE Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.cdm.index | cdm_Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.cdm.type | CDM Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ce.mode | CE Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.channel | Channel | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.channel.coefficient | Channel | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.codebook.size.determination.r13 | Codebook Size Determination R13 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.config.pnf.port.value | PNF PORT value | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.config.vnf.port.value | VNF PORT value | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.configuration.index | Configuration Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.control.type | Control type | Boolean | 2.6.0 to 3.4.5 |
| nfapi.cqi_csi_request | cqi csi request | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.crc.flag | CRC flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.cross.carrier.scheduling.flag | Cross Carrier scheduling flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.csi.config.flag | CSI Config flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.mode | CSI_mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.request | CSI request | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.antenna.port.count.r10 | CSI-RS antenna port count r10 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.class | Class | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.flag | CSI RS Flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.num.of.nzp.configurations | CSI-RS Number of NZP configuration | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.resource.config | CSI-RS resource config | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.resource.index | CSI-RS resource Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.resource_config_r10 | CSI RS resource config R10 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.csi.rs.zero.tx.power.resource.config.bitmap.r10 | CSI RS zero Tx Power Resource config bitmap R10 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.csi.scrambling | CSI Scrambling | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.current.tx.nb | Current Tx nb | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.cyclic.shift.1.for.drms | Cyclic Shift 1 for DRMS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.cyclic.shift.2.for.drms | Cyclic Shift 2 for DRMS | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.data.offset | Data Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.data.report.mode | Data Report Mode | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dci.subframe.repetition.number | DCI subframe repetition number | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.delta.offset.cqi | Delta offset cqi | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.delta.offset.harq | Delta offset HARQ | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.delta.offset.harq.2 | Delta Offset HARQ 2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.delta.offset.ri | Delta offset ri | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.delta.power.offset.index | Delta Power offset Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.delta.pucch.shift | Delta PUCCH Shift | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dia.presence.flag | DAI presence flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.direct.indication | Direct indication | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.disable.sequence.hopping.flag | Disable sequence hopping flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.dl.assignement.index.length | Downlink assignment Index Length | Unsigned integer, 1 byte | 2.6.0 to 3.2.13 |
| nfapi.dl.assignment.index.length | Downlink assignment Index Length | Unsigned integer, 1 byte | 3.4.0 to 3.4.5 |
| nfapi.dl.bandwidth.support | Downlink bandwidth support | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.bandwidth.support.100 | 100Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.bandwidth.support.15 | 15Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.bandwidth.support.25 | 25Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.bandwidth.support.50 | 50Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.bandwidth.support.6 | 6Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.bandwidth.support.75 | 75Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.channel.bandwidth | Downlink Channel Bandwidth | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.config.timing | DL config Timing | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.cqi.pmi.size | DL cqi pmi size | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.dl.cqi.pmi.size.2 | DL CQI/PMI Size 2 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.cqi.pmi.size.rank.1 | DL CQI PMI size rank 1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.dl.cqi.ri.pmi.size | DL CQI/PMI/RI size | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.dl.cqi.ri.pmi.size.2 | DL CQI/PMI/RI size 2 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.cyclic.prefix.type | DL Cyclic Prefix type | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.dci.format | DL DCI format | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.dl.modulation.support | Downlink modulation support | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.modulation.support.16qam | 16QAM | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.modulation.support.256qam | 256QAM | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.modulation.support.64qam | 64QAM | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.modulation.support.qpsk | QPSK | Boolean | 2.6.0 to 3.4.5 |
| nfapi.dl.node.sync.delta_sfn_sf | DL Node Sync Delta SFN SF | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.node.sync.t1 | DL Node Sync t1 | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.rs.tx.power | DL RS Tx power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.rs.tx.power.measurement | DL RS TX Power measurement | Signed integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dl.ue.per.sf | Downlink UEs per Subframe | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.dl_assignment_index | DL Assignment Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.doppler.estimation | Doppler estimation | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.downlink.assignment.index | Downlink assignment Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.downlink.power.offset | Downlink power offset | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.downlink_channel_bandwidth_supported | Maximum Channel Downlink Bandwidth Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.drms.config.flag | DMRS Config flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.drms.scrambling | DMRS Scrambling | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.drms.scrambling.init | DMRS scrambling init | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.drms.table.flag.r13 | Rel-13-DMRS-tabe flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.duplex.mode | Duplex Mode | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.dwpts.symbols | DwPTS Symbols | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.earfcn | EARFCN | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ecce.index | ECCE Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ecno | EcNo | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ed.threshold.for.lbt.for.drs | ED Threshold for LBT for DRS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ed.threshold.for.lbt.pdsch | ED Threshold for LBT for PDSCH | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.edpcch.prb.index | EPDCCH PRB Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.empty.symbols | Empty symbols | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.empty.symbols.due.to.retunning | Empty symbols due to re-tunning | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.epdcch.id | EPDCCH ID | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.epdcch.num.prb | EPDCCH NumPRB | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.epdcch.resource.assignment.flag | EPDCCH Resource assignment flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.epdcch.start.symbol | EPDCCH Start Symbol | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.error.code | Error Code | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.exhaustive.search | Exhaustive Search | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.fdd.ack.nack.mode | ACK NACK mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.fdd.harq.mode | Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.flag_tb2 | Flag TB2 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.fragment | Message fragment | Frame number | 2.6.0 to 3.4.5 |
| nfapi.fragment.count | Message fragment count | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.fragment.error | Message defragmentation error | Frame number | 2.6.0 to 3.4.5 |
| nfapi.fragment.multiple_tails | Message has multiple tail fragments | Boolean | 2.6.0 to 3.4.5 |
| nfapi.fragment.overlap | Message fragment overlap | Boolean | 2.6.0 to 3.4.5 |
| nfapi.fragment.overlap.conflicts | Message fragment overlapping with conflicting data | Boolean | 2.6.0 to 3.4.5 |
| nfapi.fragment.too_long_fragment | Message fragment too long | Boolean | 2.6.0 to 3.4.5 |
| nfapi.fragments | Message fragments | Label | 2.6.0 to 3.4.5 |
| nfapi.frequency.band.indicator | Frequency Band Indicator | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.frequency.domain.position | Frequency Domain position | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.frequency.hopping.bits | Frequency hopping bits | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.frequency.hopping.enabled.flag | Frequency hopping enabled flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.frequency.hopping.flag | Frequency hopping flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.frequency.offset | Frequency offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.general.tx.timing | Tx Timing | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.group.assignment | Group assignment | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.handle | Handle | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.harq.ack.resource.offset | HARQ-ACK resource offset | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.process | HARQ process | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.process.number | HARQ Process number | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.resource.offset | HARQ resource offset | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.size2 | HARQ Size 2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.tb.1 | HARQ TB1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.tb.2 | HARQ TB2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.tb.n | HARQ TB_N | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.value.0 | Value 0 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.value.0.special | Value 0 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.value.1 | Value 1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.value.2 | Value 2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq.value.3 | Value 3 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.harq_size | HARQ size | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.hf_nfapi_number_of_rf_exclusions | Number of RF exclusions | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.hi.dci0.timing | HI DCi0 Timing | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.hi_value | HI Value | Boolean | 2.6.0 to 3.4.5 |
| nfapi.hi_value_2 | HI Value 2 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.high.speed.flag | High Speed Flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.hopping.mode | Hopping Mode | Boolean | 2.6.0 to 3.4.5 |
| nfapi.hopping.offset | Hopping offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.i.srs | I SRS | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.i_phich | i phich | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.init.tx.sf.io | Initial transmission SF (io) | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.initial.lbt.sf | Initial LBT SF | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.initial.number.of.resource.blocks | Initial number of resource blocks | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.initial.partial.sf | Initial Partial SF | Boolean | 2.6.0 to 3.4.5 |
| nfapi.initial.sf.io | Initial transmission SF (io) | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.instance.length | Instance length | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.invalid.range | Invalid range | Label | 2.6.0 to 3.4.5 |
| nfapi.invalid.tlv.length | Invalid TLV length | Label | 2.6.0 to 3.4.5 |
| nfapi.laa.end.partial.sf.configuration | LAA end partial SF configuration | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.laa.end.partial.sf.flag | LAA end partial SF flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.laa.support | LAA Support | Boolean | 2.6.0 to 3.4.5 |
| nfapi.lbt.mode | LBT Mode | Boolean | 2.6.0 to 3.4.5 |
| nfapi.lbt_dl_ind_pdu_type | LBT DL Indication PDU Type | Unsigned integer, 2 bytes | 3.4.0 to 3.4.5 |
| nfapi.lbt_dl_req_pdu_type | LBT DL Request PDU Type | Unsigned integer, 2 bytes | 3.4.0 to 3.4.5 |
| nfapi.location.coordinates | Location Coordinates | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.location.mode | Location Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.lte.txop.symbols | LTE TXOP symbols | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.max.layers | MaxLayers | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.max.uppts.frame | Max UpPTS frames | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum.number.phys | Maximum number of Phys | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum.total.bandwidth | Maximum Total Bandwidth | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum.total.number.dl.layers | Maximum Total Number DL Layers | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum.total.number.ul.layers | Maximum Total Number UL Layers | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum.total.power | Maximum total power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported | Maximum 3gpp Release Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported.rel10 | Release 10 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported.rel11 | Release 11 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported.rel12 | Release 12 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported.rel13 | Release 13 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported.rel8 | Release 8 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum_3gpp_release_supported.rel9 | Release 9 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.maximum_downlink_frequency | Maximum downlink frequency | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.maximum_transmit_power | Maximum transmit power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.mbsfn.area.id | MBSFN Area id | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.mbsfn.capability | MBSFN capability | Boolean | 2.6.0 to 3.4.5 |
| nfapi.mcch.change.notification | MCCH change notification | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mcch.flag | MCCH flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.mcs | MCS | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mcs_1 | MCS_1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mcs_2 | MCS_2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.measurement.bandwidth | Measurement Bandwidth | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.measurement.period | Measurement Period | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.mib | MIB | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.minimum_downlink_frequency | Minimum downlink frequency | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.minimum_transmit_power | Minimum transmit power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.modulation | Modulation | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mp.cca | mp cca | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.mpdcch.narrowband | MPDCCH Narrowband | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mpdcch.rnti.type | RNTI type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mpdcch.transmission.type | MPDCCH transmission type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.mpdcch.ul_dci.format | UL DCI format | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.multi.carrier.freeze | Multi carrier freeze | Boolean | 2.6.0 to 3.4.5 |
| nfapi.multi.carrier.lbt.support | Multi carrier LBT support | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.multi.carrier.tx | Multi carrier TX | Boolean | 2.6.0 to 3.4.5 |
| nfapi.multi.carrier.type | Multi carrier type | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.an.cs | N AN CS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.cca | n cca | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.cqi.rb | N CQI RB | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.dl.harq | N_DL_HARQ | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.dl.rb | N_UL_RB | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.1.0 | N PUCCH 1 0 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.1.1 | N PUCCH 1 1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.1.2 | N PUCCH 1 2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.1.3 | N PUCCH 1 3 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.2.0 | n_PUCCH_2_0 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.2.1 | n_PUCCH_2_1 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.2.2 | n_PUCCH_2_2 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.pucch.2.3 | n_PUCCH_2_3 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.n.srs | N SRS | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n.srs.initial | N srs initial | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.n1.pucch.an | N1 PUCCH AN | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ndrms.csh.identity | nDMRS-CSH Identity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.new.data.indication | New Data indication | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.new.data.indication.two | New data indication 2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.new.data.indicator | New data indicator | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.new.data.indicator.1 | New data indicator_1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.new.data.indicator.2 | New data indicator_2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ngap | Ngap | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.nmm.uplink.rssi.supported | NMM Uplink RSSI supported | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.nmm_modes_supported | NMM modes supported | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.nprb | Nprb | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.npucch.identity | nPUCCH Identity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.npusch.identity | nPUSCH Identity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.nscid | NSC id | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.ant.port | Num_ant_ports | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.antennas | numAntennas | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.bf.prb.per.subband | Num of BF PRB per Subband | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.bf.vector | Num of BF Vector | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.bf.vector.bf.value | BF Num of Antennas | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.bf.vector.subband.index | BF Subband Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.of.combs | Number of Combs | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.of.tx.antenna.ports | Number of TX Antenna ports | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.prb.per.subband | numPRBperSubband | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.num.rf_bands | Number of RF Bands | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number.of.antenna.ports | Number of antenna ports | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.arfcn | Number of ARFCNs | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.cc | Number of cc | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.cc.reported | Number of CC reported | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.codebook.index | Codebook Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.earfcns | Number of EARFCNs | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.geran.cells.found | Number of GSM Cells Found | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number.of.layers | Number of layers | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.lte.cells.found | Number of LTE Cells Found | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number.of.pci | Number of PCI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.psc | Number of PSC | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.pucch.resource | Number of PUCCH Resource | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.rssi | Number of RSSI | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number.of.si.periodicity | Number of SI Periodicity | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.subbands | Number of subbands | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.tx.antenna | Number of Tx Antenna | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.uarfcn | Number of UARFCNs | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.of.utran.cells.found | Number of UTRAN Cells Found | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number.prb.pairs | Number of PRB pairs | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number.ul.dl.configurations | Number of UL/DL configurations | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_cqi | Number of CQIs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_crcs | Number of CRCs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_dci | Number of DCI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_harqs | Number of HARQs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_of_antennas_suppported | Number of Supported Antennas | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_of_dci_pdus | Number of DCI Pdu\'s | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_of_dl_layer_supported | Number of DL Layers Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_of_hi_pdus | Number of HI Pdu\'s | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_of_transport_blocks | Number of transport blocks | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_of_ul_layer_supported | Number of UL Layers Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_pdcch_ofdm_symbols | Number of PDCCH OFDM Symbols | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_pdsch_rnti | Number of PDSCH RNTI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.number_pdu | Number of PDUs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_preambles | Number of Preambles | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_srs | Number of SRs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.number_srss | Number of SRSs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.offset | offset | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.oui | OUI | Character string | 2.6.0 to 3.4.5 |
| nfapi.p4_error.code | Error Code | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.p4_p5_message_header.message_id | Message ID | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p4_p5_message_header.message_length | Message Length | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p4_p5_message_header.phy_id | PHY ID | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p4_p5_message_header.spare | Spare | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p7.message_header.message_id | Message ID | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.checksum | Checksum | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.m_segment_sequence | Sequence Number | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.message_length | Message Length | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.more_segments | More segments | Boolean | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.phy_id | Phy ID | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.segment_number | Segment Number | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.p7_message_header.timestamp | Transmit Timestamp | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.pa | P-A | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.paging.direct.indication.differentiation.flag | Paging/Direct indication differentiation flag | Unsigned integer, 1 byte | 3.4.0 to 3.4.5 |
| nfapi.paging.direct.indictation.differentiation.flag | Paging/Direct indication differentiation flag | Unsigned integer, 1 byte | 2.6.0 to 3.2.13 |
| nfapi.param.response.num_tlv | Number of TLV | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.partial.sf.support | Partial SF support | Boolean | 2.6.0 to 3.4.5 |
| nfapi.pb.allocation | P-B | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pbch.repetitions.enabled_r13 | PBCH Repetitions enable R13 | Boolean | 2.6.0 to 3.4.5 |
| nfapi.pcfich.power.offset | PCFICH Power Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pci | PCI | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pd.sensing.lbt.support | PD sensing LBT support | Boolean | 2.6.0 to 3.4.5 |
| nfapi.pd.threshold | PD Threshold | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pdsch.payload.type | PDSCH Payload Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdsch.re.mapping | PDSCH RE Mapping and Quasi-Co-Location Indicator | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdsch.remapping.antenna.ports | PDSCH RE mapping antenna ports | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdsch.remapping.flag | PDSCH RE mapping flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdsch.remapping.freq.shift | PDSCH RE mapping freq shift | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdsch.repetition.levels | PDSCH repetition levels | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdsch.start | PDSCH_start | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdu | PDU | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.pdu.index | PDU Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pdu.length | PDU length | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pdu.size | PDU size | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdu.type | PDU Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pdu_type | PDU Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.phich.configuration | PHICH Configuration | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.phich.duration | PHICH Duration | Boolean | 2.6.0 to 3.4.5 |
| nfapi.phich.power.offset | PHICH Power Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.phich.resource | PHICH Resource | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.phy.antenna.capability | Phy Antenna capability | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.phy.state | Phy state value | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.physical.cell.id | Physical Cell ID | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pmi | PMI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pmi.flag | PMI flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.pnf.address.ipv4 | PNF IPV4 | IPv4 address | 2.6.0 to 3.4.5 |
| nfapi.pnf.address.ipv6 | PNF IPV6 | IPv6 address | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy.config.index | PNF Phy Config Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy.number.phy | PNF Phy Number of Phy | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy.rf.config.phy.id | Phy ID | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel10.layer_tx_with_tm3_and_tm4 | Four layer Tx with TM3 and TM4 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel10.two_antennas_ports_for_pucch | Two antennas ports for PUCCH | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel10.tx_mode7_supported | Transmission Mode 7 Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel10.tx_mode8_supported | Transmission Mode 8 Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel10.tx_mode9_supported | Transmission Mode 9 Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel11.epdcch_supported | ePDCCH supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel11.mutli_ack_csi_reporting | Multi ACK CSI reporting | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel11.tx_div_with_channel_selection | PUCCH Tx diversity with channel selection | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel11.tx_mode5_supported | Transmission mode 5 supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel11.ul_comp_supported | UL CoMP supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel12.alternative_tbs_indices | Alternative TBS indices | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel12.csi_subframe_set | CSI subframe set | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel12.drs_supported | DRS supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel12.enhanced_t4x_codebook | Enhanced 4TX codebook | Unsigned integer, 2 bytes | 3.4.0 to 3.4.5 |
| nfapi.pnf.phy_rel12.exhanced_t4x_codebook | Enhanced 4TX codebook | Unsigned integer, 2 bytes | 2.6.0 to 3.2.13 |
| nfapi.pnf.phy_rel12.tx_mode10_supported | Transmission mode 10 supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel12.ul_64qam_supported | UL 64QAM supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.beamforming_supported | Beamforming Supported | Unsigned integer, 2 bytes | 3.4.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.beamingforming_supported | Beamforming Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.2.13 |
| nfapi.pnf.phy_rel13.csi_rs_enchancements_supported | CSI-RS enhancements supported | Unsigned integer, 2 bytes | 2.6.0 to 3.2.13 |
| nfapi.pnf.phy_rel13.csi_rs_enhancements_supported | CSI-RS enhancements supported | Unsigned integer, 2 bytes | 3.4.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.drms_enhancements_supported | DMRS enhancements supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.laa_ending_in_dwpts_supported | LAA ending in DwPTS supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.laa_starting_in_second_slot_supported | LAA starting in second slot Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.laa_supported | LAA supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.mode_than_5_ca_supported | More than 5 CA support | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.pucch_format4_supported | PUCCH format 4 supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.pucch_format5_supported | PUCCH format 5 supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.phy_rel13.srs_enhancements_supported | SRS enhancements supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.rf.number.rf | Number of RFs | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pnf.simultaneous_pucch_pusch | Simultaneous PUCCH PUSCH | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.cat_m.high.speed.flag | PRACH CAT-M High speed flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.cat_m.root.sequence.index | PRACH CAT-M Root sequence Index | Unsigned integer, 2 bytes | 3.4.0 to 3.4.5 |
| nfapi.prach.cat_m.root.squence.index | PRACH CAT-M Root sequence Index | Unsigned integer, 2 bytes | 2.6.0 to 3.2.13 |
| nfapi.prach.cat_m.zero.correlation.zone.configuration | PRACH CAT-M Zero correlation zone configuration | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.configuration.index | PRACH CE level #0 Configuration Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.enable | PRACH CE level #0 Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.frequency_offset | PRACH CE level #0 Frequency offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.hopping.offset | PRACH CE level #0 Hopping Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.hopping_enable | PRACH CE level #0 Hopping Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.number.of.repetitions.per_attempt | PRACH CE level #0 Number of repetitions per attempt | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.0.starting.subframe_periodicity | CE level #0 Starting subframe periodicity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.1.configuration.index | PRACH CE level #1 Configuration Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.1.frequency_offset | PRACH CE level #1 Frequency offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.1.hopping.offset | PRACH CE level #1 Hopping Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.1.hopping_enable | PRACH CE level #1 Hopping Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.1.number.of.repetitions.per_attempt | PRACH CE level #1 Number of repetitions per attempt | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.1.starting.subframe_periodicity | CE level #1 Starting subframe periodicity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.configuration.index | PRACH CE level #2 Configuration Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.enable | PRACH CE level #2 Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.frequency_offset | PRACH CE level #2 Frequency offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.hopping.offset | PRACH CE level #2 Hopping Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.hopping_enable | PRACH CE level #2 Hopping Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.number.of.repetitions.per_attempt | PRACH CE level #2 Number of repetitions per attempt | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.2.starting.subframe_periodicity | CE level #2 Starting subframe periodicity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.configuration.index | PRACH CE level #3 Configuration Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.enable | PRACH CE level #3 Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.frequency_offset | PRACH CE level #3 Frequency offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.hopping.offset | PRACH CE level #3 Hopping Offset | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.hopping_enable | PRACH CE level #3 Hopping Enable | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.number.of.repetitions.per_attempt | PRACH CE level #3 Number of repetitions per attempt | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.ce.level.3.starting.subframe_periodicity | CE level #3 Starting subframe periodicity | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prach.mask.index | PRACH mask Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.preamable.index | Preamble Index | Unsigned integer, 1 byte | 2.6.0 to 3.2.13 |
| nfapi.preamble | Preamble | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.preamble.index | Preamble Index | Unsigned integer, 1 byte | 3.4.0 to 3.4.5 |
| nfapi.precoding.information | Precoding information | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.precoding.value | Precoding value | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.primary.cell.type | Primary cell type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.primary.sync.signal | Primary synchronization signal EPRE/EPRERS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prnti | P-RNTI | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.prs.bandwidth | PRS bandwidth | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.prs.cyclic.prefix.type | PRS cyclic prefix type | Boolean | 2.6.0 to 3.4.5 |
| nfapi.prs.muting | PRS muting | Boolean | 2.6.0 to 3.4.5 |
| nfapi.psc | PSC | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pscch.resource | PSCCH Resource | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.pucch.index | PUCCH Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pucch.index.p1 | PUCCH Index P1 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pucch.interval.ulhopping.config.common.mode.a | PUCCH Interval-ULHoppingConfigCommonModeA | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pucch.interval.ulhopping.config.common.mode.b | PUCCH Interval-ULHoppingConfigCommonModeB | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.pusch.repetition.levels | PUSCH repetition levels | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.r13.drms.table.flag | Rel-13-DMRS-tabe flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rach.prach.frequency.resources | RACH PRACH Frequency resources | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rach.resource.type | RACH resource type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rat_type | RAT Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rb.start | RB Start | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.reassembled.in | Reassembled in | Frame number | 2.6.0 to 3.4.5 |
| nfapi.reassembled.length | Reassembled length | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.received.interference.power | Received interference power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.received.interference.power.measurement | Received interference power measurement | Signed integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.redundancy.version | Redundancy version | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.redundancy.version.1 | Redundancy version_1 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.redundancy.version.2 | Redundancy version_2 | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ref_sig_power | Reference signal power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.release.capability | Release capability | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.repetition.number | Repetition Number | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.report.type | Report type | Boolean | 2.6.0 to 3.4.5 |
| nfapi.resource.allocation.flag | Resource allocation flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.resource.allocation.type | Resource Allocation Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.resource.block.assignement | Resource Block Assignment | Unsigned integer, 1 byte | 2.6.0 to 3.2.13 |
| nfapi.resource.block.assignment | Resource Block Assignment | Unsigned integer, 1 byte | 3.4.0 to 3.4.5 |
| nfapi.resource.block.assignment.flag | Virtual resource block assignment flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.resource.block.coding | Resource block coding | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.resource.block.start | Resource block start | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.resource.blocks | Number of resource blocks | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.result | result | Boolean | 2.6.0 to 3.4.5 |
| nfapi.retry.count | retryCount | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rf_config_index | RF Config Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ri | RI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ri.size | RI size | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rnti | RNTI | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.rnti.type | RNTI type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.root.sequence.index | Root sequence Index | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.rscp | RSCP | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rsrp | RSRP | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rsrq | RSRQ | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rssi | RSSI | Signed integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.rx.antenna.ports | Tx Antenna Ports | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.rxlev | RxLev | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.rxqual | RxQual | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.scrambling.identity | Scrambling identity | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.secondary.sync.signal | Secondary synchronization signal EPRE/EPRERS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.sfn.offset | SFN Offset | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.sfn.sf | SFN/SF | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.sfn.sf.end | SFN/SF End | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.sfn_sf | SFN_SF | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.shared.bands | Shared bands | Boolean | 2.6.0 to 3.4.5 |
| nfapi.shared.pa | Shared pa | Boolean | 2.6.0 to 3.4.5 |
| nfapi.si | SI | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.si.index | SI Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.si.periodicity | SI Periodicity | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.si.window.length | SI Window Length | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.sib | SIB | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.sib.type | SIB Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.sib1 | SIB1 | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.size | Size | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.size.of.cqi.csi.feild | Size of cqi csi feild | Unsigned integer, 1 byte | 2.6.0 to 3.2.13 |
| nfapi.size.of.cqi.csi.field | Size of cqi csi field | Unsigned integer, 1 byte | 3.4.0 to 3.4.5 |
| nfapi.snr | SNR | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.sounding.reference.cyclic.shift | Sounding reference cyclic shift | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.special.subframe.patterns | Special Subframe patterns | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.srs.acknack.simult.tx | SRS AckNack Simultaneous transmission | Boolean | 2.6.0 to 3.4.5 |
| nfapi.srs.bandwidth | SRS Bandwidth | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.srs.flag | SRS flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.srs.hopping.bandwidth | SRS hopping bandwidth | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.srs.present | SRS present | Boolean | 2.6.0 to 3.4.5 |
| nfapi.srs.request | SRS request | Boolean | 2.6.0 to 3.4.5 |
| nfapi.srs.subframe.configuration | SRS subframe configuration | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.start.symbol | Start symbol | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.starting.ce.level | Starting CE Level | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.starting.prb | Starting PRB | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.state | State | Sequence of bytes | 2.6.0 to 3.4.5 |
| nfapi.subband.index | subbandIndex | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.subframe.assignment | Subframe_assignment | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.sync.mode | Sync Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tdd.ack.nack.mode | ACK NACK mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tdd.harq.mode | Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.thermal.noise.power | Thermal noise power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.thermal.noise.power.measurement | Thermal noise power measurement | Signed integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.time.resource.pattern | Time resource pattern | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.timeout | Timeout | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.advance | Timing Advance | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.advance.r9 | Timing Advance R9 | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.dl.config.earliest.arrival | DL Config Earliest Arrival | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.dl.config.jitter | DL Config Jitter | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.dl.config.latest.delay | DL Config Latest Delay | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.hi.dci0.earliest.arrival | HI_DCI0 Earliest Arrival | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.hi.dci0.jitter | HI_DCI0 Jitter | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.hi.dci0.latest.delay | HI_DCI0 Latest Delay | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.last.sfn.sf | Last SFN/SF | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.mode | Timing Info mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.timing.info.period | Timing info period | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.timing.info.time.since.last.timing.info | Time since last Timing Info | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.tx.req.jitter | Tx Request Jitter | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.tx.request.earliest.arrival | Tx Request Earliest Arrival | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.tx.request.latest.delay | Tx Request Latest Delay | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.ul.config.earliest.arrival | UL Config Earliest Arrival | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.ul.config.jitter | UL Config Jitter | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.info.ul.config.latest.delay | UL Config Latest Delay | Signed integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.timing.window | NFAPI Timing window | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tl_length | TLV Length | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.tl_tag | TLV Tag | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.total.dci.length.including.padding | Total DCI length including padding | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.total.number.of.repetitions | Total Number of repetitions | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.tpc | TPC | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tpc_bitmap | TPC bitmap | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tpmi | TPMI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tpmi.length | TPMI length | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.transmission.comb | Transmission comb | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.transmission.power.for.drs | Transmission power for DRS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.transmission.scheme | Transmission scheme | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.transmission_nprb | Transmission Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.transmission_power | Transmission Power | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.transmission_power_pcfich | Transmission Power PCFICH | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.transport.block.size.index | Transport block size Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.transport.block.to.codeword.swap.flag | Transport block to codeword swap flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.transport.blocks | Transport blocks | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.tx.antenna.ports | Tx Antenna Ports | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.tx.antenna.ports.for.drs | Tx antenna ports for DRS | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.txop.sf | LTE TXOP SF | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.txop.sfn.sf.end | TXOP SFN/SF End | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.uarfcn | UARFCN | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ue.category.capacity | UE category capacity | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ue.mode | UE Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ue.type | UE Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ue_tx_antenna_selection | UE Tx Antenna selection | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.uint16.tag | Number of ACK/NACK | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support | Uplink bandwidth support | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support.100 | 100Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support.15 | 15Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support.25 | 25Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support.50 | 50Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support.6 | 6Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.bandwidth.support.75 | 75Mhz | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.channel_bandwidth | Uplink Channel Bandwidth | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.config.pdu.type | UL Config PDU Type | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ul.config.timing | UL Config Timing | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.cqi | UL_CQI | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ul.cyclic.prefix.type | UL Cyclic Prefix type | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.dl.configuration.flag | UL/DL configuration flag | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.dl.configuration.indication | UL/DL configuration indication | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ul.modulation.support | Uplink modulation support | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.modulation.support.16qam | 16QAM | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.modulation.support.64qam | 64QAM | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.modulation.support.qpsk | QPSK | Boolean | 2.6.0 to 3.4.5 |
| nfapi.ul.node.sync.t1 | UL Node Sync t1 | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.node.sync.t2 | UL Node Sync t2 | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.node.sync.t3 | UL Node Sync t3 | Unsigned integer, 4 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.rtoa | UL_RTOA | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.ul.tx.mode | UL Tx Mode | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ul.ue.per.sf | Uplink UEs per Subframe | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ul_dci.format | UL DCI format | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.ul_index | UL Index | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.uplink.rs.hopping | Uplink RS hopping | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.uplink_channel_bandwidth_supported | Maximum Channel Uplink Bandwidth Supported | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
| nfapi.uppts.symbol | UpPTS Symbol | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.virtual.cell.id.enabled.flag | Virtual cell ID enabled flag | Unsigned integer, 1 byte | 2.6.0 to 3.4.5 |
| nfapi.vnf.address.ipv4 | VNF IPV4 Address | IPv4 address | 2.6.0 to 3.4.5 |
| nfapi.vnf.address.ipv6 | VNF IPV6 Address | IPv6 address | 2.6.0 to 3.4.5 |
| nfapi.zero.correlation.zone.configuration | Zero correlation zone configuration | Unsigned integer, 2 bytes | 2.6.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance