Display Filter Reference: netANALYZER
Protocol field name: netanalyzer
Versions: 1.8.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| netanalyzer.alignment_error | Displayed frame data contains additional nibble due to alignment error (upper nibble is not valid) | Label | 2.0.0 to 3.4.5 |
| netanalyzer.buffer | Buffer state entry | Label | 2.4.0 to 3.4.5 |
| netanalyzer.buffer.source | Buffer source | Unsigned integer, 1 byte | 2.4.0 to 3.4.5 |
| netanalyzer.buffer.state | Buffer state | Unsigned integer, 1 byte | 2.4.0 to 3.4.5 |
| netanalyzer.eth | Ethernet frame | Label | 2.4.0 to 3.4.5 |
| netanalyzer.framelen | Ethernet frame length | Unsigned integer, 2 bytes | 1.8.0 to 3.4.5 |
| netanalyzer.gpio_def_none | No valid netANALYZER GPIO definition found | Label | 1.12.0 to 3.4.5 |
| netanalyzer.gpio_event | GPIO event | Label | 2.4.0 to 3.4.5 |
| netanalyzer.gpio_event.gpio_edge | GPIO event type | Unsigned integer, 1 byte | 1.8.0 to 3.4.5 |
| netanalyzer.gpio_event.gpio_number | GPIO event on | Unsigned integer, 1 byte | 1.8.0 to 3.4.5 |
| netanalyzer.header.none | No netANALYZER header found | Label | 2.4.0 to 3.4.5 |
| netanalyzer.header.wrong | Wrong netANALYZER header | Label | 2.4.0 to 3.4.5 |
| netanalyzer.header_version.none | Expert Info | Label | 1.12.0 to 2.2.17 |
| netanalyzer.header_version.wrong | Expert Info | Label | 1.12.0 to 2.2.17 |
| netanalyzer.not_implemented | This feature is currently not implemented in Wireshark | Label | 2.4.0 to 3.4.5 |
| netanalyzer.packetstatus | Status | Unsigned integer, 1 byte | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.alignment_error | Alignment error | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.fcs_error | FCS error | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.long_preamble | Preamble longer than 7 bytes | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.rx_er | MII RX_ER error | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.sfd_error | No valid SFD found | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.short_frame | Frame smaller 64 bytes | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.short_preamble | Preamble shorter than 7 bytes | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.packetstatus.too_long | Frame too long | Boolean | 1.8.0 to 3.4.5 |
| netanalyzer.port | Reception Port | Unsigned integer, 1 byte | 1.8.0 to 3.4.5 |
| netanalyzer.timetick | Time tick | Label | 2.4.0 to 3.4.5 |
| netanalyzer.transparent_frame | This frame was captured in transparent mode | Label | 2.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance