Display Filter Reference: ATM Cell
Protocol field name: mplspwatmcell
Versions: 1.4.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| atm.cell.len | Length | Signed integer, 4 bytes | 1.4.0 to 3.4.5 |
| atm.cell_broken | PW ATM cell is broken | Label | 1.12.0 to 3.4.5 |
| atm.pti.invalid | Unknown value of PTI field in the ATM cell header | Label | 1.12.0 to 3.4.5 |
| atm.pw_control_byte.m.not_zero | 1:1 mode: M bit must be 0 to distinguish from AAL5 PDU mode | Label | 1.12.0 to 3.4.5 |
| atm.pw_control_byte.rsv.not_zero | Reserved bits in the 3rd byte of CW must be 0 | Label | 1.12.0 to 3.4.5 |
| atm.pw_control_byte.v.not_one | 1:1 VPC mode: V bit must be 1 to indicate that VCI is present | Label | 1.12.0 to 3.4.5 |
| atm.pw_control_byte.v.not_zero | 1:1 VCC mode: V bit must be 0 to indicate that VCI is absent | Label | 1.12.0 to 3.4.5 |
| pw.cw.atmbyte | ATM-specific byte of CW is fully dissected below | Label | 2.0.0 to 3.4.5 |
| pw.cw.bits03.not_zero | Bits 0..3 of Control Word must be 0 | Label | 1.12.0 to 3.4.5 |
| pw.cw.flags.not_zero | Flags must be 0 for PW ATM N:1 encapsulation | Label | 1.12.0 to 3.4.5 |
| pw.cw.length.invalid | Bad Length: must be 0 for this encapsulation | Label | 1.12.0 to 3.4.5 |
| pw.packet_size_too_small | PW packet size too small | Label | 1.12.0 to 3.4.5 |
| pw.payload.size_invalid | PW payload size invalid | Label | 1.12.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance