Display Filter Reference: KNXnet/IP
Protocol field name: knx
Versions: 2.0.0 to 2.6.20
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| knxnetip.additional | Additional information | Label | 2.0.0 to 2.6.20 |
| knxnetip.additional_item_length | Length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.additional_length | add information length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.apcikey | key | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.apcilevel | level | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.apciobjidx | object index | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.apcipropid | property id | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.busy_control | Busy Control Field | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.busy_time | Busy Wait Time | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemi | cEMI | Label | 2.0.0 to 2.6.20 |
| knxnetip.cemi_messagecode | messagecode | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_bibat | BiBat | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_bus | Busmonitor error flags | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_delay | delay | Unsigned integer, 4 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_exttime | extended timestamp | Unsigned integer, 4 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_id | Type id | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_pl | Domain-Address | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemi_type_reltime | relative timestamp | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemibibbatblock | BiBat Block number | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemibusberror | Bit error flag | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemibusdont | dont care | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemibusferror | Frame error flag | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemibuslost | Lost flag | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemibusparity | Parity error flag | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemibusseq | Sequence Number | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemichannel | Channel nr | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemidata | Data | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemidestination | Destination Address | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemierror | Error Code | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemifastack | Fast Ack information | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemifastackcrc | Fast Ack is received with a CRC | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemifastackerror | Fast Ack is received with a Manchester error | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemifastackinfo | Fast Ack Info | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemifastackres | Fast Ack has been received | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemiiot | Interface object type | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemiknxsn | KNX Serial Number | Unsigned integer, 8 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemilfn | Data Link Layer frame number | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemimanuspecificdata | Manufacturer specific data | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemimemaddress | Memory Address | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.ceminoe | Number of Elements | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.ceminumber | Number of Elements | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.ceminumberofslots | number of slots | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemioi | Object Instance | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemipid | Property Identifier | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemipostamblelength | Postamble Length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemipreamblelength | Preamble Length | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemireserved | reserved | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemireturn | retrun code | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfbattery | Battery state | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfchannel | KNX RF Multi Call Channel | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirffastack | KNX RF Multi Fast Ack | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirffreq | KNX RF Multi Transmission Frequency | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfinfo | RF-Info | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfmesure | received signal strength | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfmesurere | retransmitter signal strrength | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfrecfreq | KNX RF Multi Reception Frequency | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemirfreserved | reserved | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemisource | Source Address | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.cemisubfunction | Subfunction | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.cemitpci | TPCI | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.communication_channel_id | Communication Channel ID | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.confirm_ack_status | Status | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.connect_state_status | Status | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.connect_status | Status | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.connection_type | Connection Type | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controldestaddress | Destination address type | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controleff | Extended Frame Format | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_ack | Acknowledge-Request | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_broadcast | System-Broadcast | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_confirm | Confirm-Flag | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_one | Controlfield 1 | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_priority | Priority | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_repeat | Repeat | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_two | Controlfield 2 | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlfield_type | Frametype | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.controlhop | Hop count | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.crd | Connection Response Data Block | Label | 2.0.0 to 2.6.20 |
| knxnetip.crd_data | Protocol Data | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.cri | Connection Request Information | Label | 2.0.0 to 2.6.20 |
| knxnetip.cri_data | Protocol Data | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.data | data | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.devicename | Device Friendly Name | Character string | 2.0.0 to 2.6.20 |
| knxnetip.devicestate | DeviceState | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.devicestate_ip | IP Fault | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.devicestate_knx | KNX Fault | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.devicestate_reserved | reserved | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib | DIB | Label | 2.0.0 to 2.6.20 |
| knxnetip.dib_assignment | IP assignment method | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_dhcp | DHCP Server | IPv4 address | 2.0.0 to 2.6.20 |
| knxnetip.dib_gateway | Default Gateway | IPv4 address | 2.0.0 to 2.6.20 |
| knxnetip.dib_ipaddress | IP Address | IPv4 address | 2.0.0 to 2.6.20 |
| knxnetip.dib_ipcapabilities | IP Capabilities | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_medium | KNX medium | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_program_mode | program mode | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_projectid | Project-Installation identifier | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.dib_reserved | reserved | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_service | Service ID | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_status | Device Status | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.dib_subnet | Subnet Mask | IPv4 address | 2.0.0 to 2.6.20 |
| knxnetip.dib_type | Description Type | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.header_length | Header Length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.hpai | HPAI | Label | 2.0.0 to 2.6.20 |
| knxnetip.hpai_host_protocol | Host Protocol Code | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.hpai_ip_address | IP Address | IPv4 address | 2.0.0 to 2.6.20 |
| knxnetip.hpai_port | IP Port | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.hpai_structure_length | Structure Length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.installnumber | Installation number | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.invalid.length | invalid length | Label | 2.0.0 to 2.6.20 |
| knxnetip.ip_capabilities_autoip | AutoIP | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.ip_capabilities_bootip | BootIP | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.ip_capabilities_dhcp | DHCP | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.ip_capabilities_reserved | reserved | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.knxaddress | KNX Individual Address | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.layer | KNX Layer | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.macaddress | KNXnet/IP device MAC address | Ethernet or other MAC address | 2.0.0 to 2.6.20 |
| knxnetip.manufacturer_data | Manufacturer specific data | Character string | 2.0.0 to 2.6.20 |
| knxnetip.manufacturer_id | Manufacturer ID | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.multicast | KNXnet/IP device multicast address | IPv4 address | 2.0.0 to 2.6.20 |
| knxnetip.npduapci | APCI | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.npdulength | NPDU length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.npduseq | sequence NCD/NDT | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.number_of_lost_msg | NumberofLostMessages | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.polldata | Poll data | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.projectnumber | Project number | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.raw | RAW Frame | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.reserved | reserved | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.reset | Reset Command | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.selector | Selector Type Code | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.sequence_counter | Sequence Counter | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.serialnumber | KNXnet/IP device serial number | Sequence of bytes | 2.0.0 to 2.6.20 |
| knxnetip.service_type_identifier | Service Type Identifier | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.struct_length | Structure Length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.svcversion | Version | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.total_length | Total Length | Unsigned integer, 2 bytes | 2.0.0 to 2.6.20 |
| knxnetip.tpdulength | TPDU length | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.tunnel_status | Status | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
| knxnetip.unknown | UNKNOWN | Label | 2.0.0 to 2.6.20 |
| knxnetip.version | Protocol Version | Unsigned integer, 1 byte | 2.0.0 to 2.6.20 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance