Display Filter Reference: Internet Group Management Protocol
Protocol field name: igmp
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
Field name | Description | Type | Versions |
---|---|---|---|
igmp.access_key | Access Key | Sequence of bytes | 1.0.0 to 3.4.5 |
igmp.aux_data | Aux Data | Sequence of bytes | 1.0.0 to 3.4.5 |
igmp.aux_data_len | Aux Data Len | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.bad_checksum | Bad checksum | Label | 2.4.0 to 3.4.5 |
igmp.checksum | Checksum | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
igmp.checksum.status | Checksum Status | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
igmp.checksum_bad | Bad Checksum | Boolean | 1.0.0 to 2.0.16 |
igmp.data | Data | Sequence of bytes | 2.0.0 to 3.4.5 |
igmp.group_type | Type Of Group | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.identifier | Identifier | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
igmp.maddr | Multicast Address | IPv4 address | 1.0.0 to 3.4.5 |
igmp.max_resp | Max Resp Time | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.max_resp.exp | Exponent | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.max_resp.mant | Mantissa | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.max_hops | # hops | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_arrival | Query Arrival | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
igmp.mtrace.q_fwd_code | Forwarding Code | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_fwd_ttl | FwdTTL | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_id | Query ID | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
igmp.mtrace.q_inaddr | In itf addr | IPv4 address | 1.0.0 to 3.4.5 |
igmp.mtrace.q_inpkt | In pkts | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
igmp.mtrace.q_mbz | MBZ | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_outaddr | Out itf addr | IPv4 address | 1.0.0 to 3.4.5 |
igmp.mtrace.q_outpkt | Out pkts | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
igmp.mtrace.q_prevrtr | Previous rtr addr | IPv4 address | 1.0.0 to 3.4.5 |
igmp.mtrace.q_rtg_proto | Rtg Protocol | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_s | S | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_src_mask | Src Mask | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.q_total | S,G pkt count | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
igmp.mtrace.raddr | Receiver Address | IPv4 address | 1.0.0 to 3.4.5 |
igmp.mtrace.resp_ttl | Response TTL | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.mtrace.rspaddr | Response Address | IPv4 address | 1.0.0 to 3.4.5 |
igmp.mtrace.saddr | Source Address | IPv4 address | 1.0.0 to 3.4.5 |
igmp.num_grp_recs | Num Group Records | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
igmp.num_src | Num Src | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
igmp.qqic | QQIC | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.qrv | QRV | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.record_type | Record Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.reply | Reply | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.reply.pending | Reply Pending | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.reserved | Reserved | Sequence of bytes | 2.0.0 to 3.4.5 |
igmp.s | S | Boolean | 1.0.0 to 3.4.5 |
igmp.saddr | Source Address | IPv4 address | 1.0.0 to 3.4.5 |
igmp.type | Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
igmp.version | IGMP Version | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance