Display Filter Reference: FC Extended Link Svc
Protocol field name: fcels
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
Field name | Description | Type | Versions |
---|---|---|---|
fcels.alpa | AL_PA Map | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.cbind.addr_mode | Addressing Mode | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.cbind.dnpname | Destination N_Port Port_Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.cbind.handle | Connection Handle | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.cbind.ifcp_version | iFCP version | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.cbind.liveness | Liveness Test Interval | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.cbind.snpname | Source N_Port Port_Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.cbind.status | Status | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.cbind.userinfo | UserInfo | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fcels.cls.cns | Class Supported | Boolean | 1.0.0 to 3.4.5 |
fcels.cls.nzctl | Non-zero CS_CTL | Boolean | 1.0.0 to 3.4.5 |
fcels.cls.prio | Priority | Boolean | 1.0.0 to 3.4.5 |
fcels.cls.sdr | Delivery Mode | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.bbb | B2B Credit Mgmt | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.broadcast | Broadcast | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.cios | Cont. Incr. Offset Supported | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.clk | Clk Sync | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.dhd | DHD Capable | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.e_d_tov | E_D_TOV | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.multicast | Multicast | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.payload | Payload Len | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.rro | RRO Supported | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.security | Security | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.seqcnt | SEQCNT | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.simplex | Simplex | Boolean | 1.0.0 to 3.4.5 |
fcels.cmn.vvv | Valid Vendor Version | Boolean | 1.0.0 to 3.4.5 |
fcels.common_identification_data_length | Common Identification Data Length | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.dst.type.unknown | Unknown destination address type | Label | 1.12.0 to 3.4.5 |
fcels.edtov | E_D_TOV | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.estat | Exchange Status | Unsigned integer, 4 bytes | 1.4.0 to 3.4.5 |
fcels.estat.complete | Exchange Complete | Boolean | 1.4.0 to 3.4.5 |
fcels.estat.resp | Sequence Responder | Boolean | 1.4.0 to 3.4.5 |
fcels.estat.seq_init | Sequence Initiative | Boolean | 1.4.0 to 3.4.5 |
fcels.faddr | Fabric Address | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.faildrcvr | Failed Receiver AL_PA | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.fcpflags | FCP Flags | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fcels.fcpflags.ccomp | Comp | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.datao | Data Overlay | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.initiator | Initiator | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.rdxr | Rd Xfer_Rdy Dis | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.retry | Retry | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.target | Target | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.trirep | Task Retry Ident | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.trireq | Task Retry Ident | Boolean | 1.0.0 to 3.4.5 |
fcels.fcpflags.wrxr | Wr Xfer_Rdy Dis | Boolean | 1.0.0 to 3.4.5 |
fcels.flacompliance | FC-FLA Compliance | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.flag | Flag | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.fnname | Fabric/Node Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.fpname | Fabric Port Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.hrdaddr | Hard Address of Originator | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.invalid_crc_count | Invalid CRC Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.invalid_xmission_word | Invalid Xmission Word | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.l_port_status | L_Port Status | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.link_failure_count | Link Failure Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lip.al_ps | LIP AL_PS | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.lip.f7_initiated_count | LIP F7 Initiated Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lip.f7_received_count | LIP F7 Received Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lip.f8_initiated_count | LIP F8 Initiated Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lip.f8_received_count | LIP F8 Received Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lip.reset_initiated_count | LIP Reset Initiated Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lip.reset_received_count | LIP Reset Received Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.lirr.regn_format | Regn. Format | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.lirr.regn_function | Regn. Function | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.logi.b2b | B2B Credit | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.logi.bbscnum | BB_SC Number | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.logi.cls1param | Class 1 Svc Param | Sequence of bytes | 1.0.0 to 1.8.15 |
fcels.logi.cls2param | Class 2 Svc Param | Sequence of bytes | 1.0.0 to 1.8.15 |
fcels.logi.cls3param | Class 3 Svc Param | Sequence of bytes | 1.0.0 to 1.8.15 |
fcels.logi.cls4param | Class 4 Svc Param | Sequence of bytes | 1.0.0 to 1.8.15 |
fcels.logi.clsflags | Service Options | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.clsrcvsize | Class Recv Size | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.cmnfeatures | Common Svc Parameters | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.e2e | End2End Credit | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.initctl | Initiator Ctl | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.initctl.ack0 | ACK0 Capable | Boolean | 1.0.0 to 3.4.5 |
fcels.logi.initctl.ackgaa | ACK GAA | Boolean | 1.0.0 to 3.4.5 |
fcels.logi.initctl.initial_pa | Initial P_A | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.initctl.sync | Clock Sync | Boolean | 1.0.0 to 3.4.5 |
fcels.logi.maxconseq | Max Concurrent Seq | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.openseq | Open Seq Per Exchg | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.logi.rcptctl | Recipient Ctl | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.rcptctl.ack | ACK0 | Boolean | 1.0.0 to 3.4.5 |
fcels.logi.rcptctl.category | Category | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.rcptctl.interlock | X_ID Interlock | Boolean | 1.0.0 to 3.4.5 |
fcels.logi.rcptctl.policy | Policy | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.rcptctl.sync | Clock Sync | Boolean | 1.0.0 to 3.4.5 |
fcels.logi.rcvsize | Receive Size | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.reloff | Relative Offset By Info Cat | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.logi.svcavail | Services Availability | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.logi.totconseq | Total Concurrent Seq | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.logi.vendvers | Vendor Version | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.loopstate | Loop State | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.loss_of_signal_count | Loss of Signal Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.loss_of_sync_count | Loss of Sync Count | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.matchcp | Match Address Code Points | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.no_record_of_els_req | No record of ELS Req. Unable to decode ACC | Label | 2.0.0 to 3.4.5 |
fcels.no_record_of_exchange | No record of Exchange. Unable to decode ACC | Label | 2.0.0 to 3.4.5 |
fcels.npname | N_Port Port_Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.opcode | Cmd Code | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.oxid | OXID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.portid | Originator S_ID | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.portnum | Physical Port Number | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fcels.portstatus | Port Status | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.primitive_seq_protocol_err | Primitive Seq Protocol Err | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.3rd_party_n_port_id | 3rd Party N_Port Id | Sequence of bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.3rd_party_originator_pa | 3rd Party Originator PA | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.originator_pa | Originator PA | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.page_length | Page Length | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.prlilo.payload_length | Payload Length | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.responder_pa | Responder PA | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.response_code | Response Code | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.prlilo.service_parameter_response | Service Parameter Response | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.prlilo.type | TYPE | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.prlilo.type_code_extension | TYPE Code Extension | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.prliloflags | PRLILO Flags | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.prliloflags.eip | Est Image Pair | Boolean | 1.0.0 to 3.4.5 |
fcels.prliloflags.ipe | Image Pair Estd | Boolean | 1.0.0 to 3.4.5 |
fcels.prliloflags.opav | Orig PA Valid | Boolean | 1.0.0 to 3.4.5 |
fcels.pubdev_bmap | Public Loop Device Bitmap | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.pvtdev_bmap | Private Loop Device Bitmap | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.rcovqual | Recovery Qualifier | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rec.fc4value | FC4 value | Unsigned integer, 4 bytes | 1.4.0 to 3.4.5 |
fcels.recovery_qualifier_status | Recovery Qualifier Status | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.reqipaddr | Requesting IP Address | IPv6 address | 1.0.0 to 3.4.5 |
fcels.respaction | Responder Action | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.respipaddr | Responding IP Address | IPv6 address | 1.0.0 to 3.4.5 |
fcels.respname | Responding Port Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.respnname | Responding Node Name | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fcels.resportid | Responding Port ID | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.rjt.detail | Reason Explanation | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rjt.reason | Reason Code | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rjt.vnduniq | Vendor Unique | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rnft.fc4type | FC-4 Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rnft.fc_4_qualifier | FC-4 Qualifier | Unsigned integer, 3 bytes | 2.0.0 to 3.4.5 |
fcels.rnft.index | Index | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.rnft.index_of_first_rec_in_list | Index of First Rec in List | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.rnft.list_length | List Length | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.rnft.max_size | Max Size | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rnft.payload_len | Payload Len | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rnid.asstype | Associated Type | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fcels.rnid.attnodes | Number of Attached Nodes | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fcels.rnid.ip | IP Address | IPv6 address | 1.0.0 to 3.4.5 |
fcels.rnid.ipvers | IP Version | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rnid.nodeidfmt | Node Identification Format | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rnid.nodemgmt | Node Management | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rnid.physport | Physical Port Number | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fcels.rnid.spidlen | Specific Id Length | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rnid.tcpport | TCP/UDP Port Number | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.rnid.vendorsp | Vendor Specific | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.rnid.vendoruniq | Vendor Unique | Sequence of bytes | 1.0.0 to 3.4.5 |
fcels.rpl.index | Index | Unsigned integer, 3 bytes | 2.0.0 to 3.4.5 |
fcels.rpl.index_of_i_port_block | Index of I Port Block | Unsigned integer, 3 bytes | 2.0.0 to 3.4.5 |
fcels.rpl.list_length | List Length | Unsigned integer, 3 bytes | 2.0.0 to 3.4.5 |
fcels.rpl.max_size | Max Size | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rpl.payload_length | Payload Length | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rpl.physical_port | Physical Port # | Unsigned integer, 4 bytes | 2.0.0 to 3.4.5 |
fcels.rpl.port_identifier | Port Identifier | Sequence of bytes | 2.0.0 to 3.4.5 |
fcels.rpl.port_name | Port Name | Fibre Channel WWN | 2.0.0 to 3.4.5 |
fcels.rpsc.number_of_entries | Number of Entries | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rpsc.port_oper_speed | Port Oper Speed | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rscn.addrfmt | Address Format | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rscn.area | Affected Area | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rscn.domain | Affected Domain | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rscn.evqual | Event Qualifier | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rscn.page_len | Page Len | Unsigned integer, 1 byte | 2.0.0 to 3.4.5 |
fcels.rscn.payload_len | Payload Len | Unsigned integer, 2 bytes | 2.0.0 to 3.4.5 |
fcels.rscn.port | Affected Port | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.rxid | RXID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.scr.regn | Registration Function | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fcels.speedflags | Port Speed Capabilities | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fcels.speedflags.10gb | 10Gb Support | Boolean | 1.0.0 to 3.4.5 |
fcels.speedflags.1gb | 1Gb Support | Boolean | 1.0.0 to 3.4.5 |
fcels.speedflags.2gb | 2Gb Support | Boolean | 1.0.0 to 3.4.5 |
fcels.speedflags.4gb | 4Gb Support | Boolean | 1.0.0 to 3.4.5 |
fcels.src.type.unknown | Unknown source address type | Label | 1.12.0 to 3.4.5 |
fcels.srl.fl_port_addr | FL_Port Addr | Sequence of bytes | 2.0.0 to 3.4.5 |
fcels.srl.flag | Flag | Boolean | 2.0.0 to 3.4.5 |
fcels.tprloflags.gprlo | Global PRLO | Boolean | 1.0.0 to 3.4.5 |
fcels.tprloflags.npv | 3rd Party N_Port Valid | Boolean | 1.0.0 to 3.4.5 |
fcels.tprloflags.opav | 3rd Party Orig PA Valid | Boolean | 1.0.0 to 3.4.5 |
fcels.tprloflags.rpav | Resp PA Valid | Boolean | 1.0.0 to 3.4.5 |
fcels.unbind.status | Status | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance