Display Filter Reference: Fibre Channel
Protocol field name: fc
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
Field name | Description | Type | Versions |
---|---|---|---|
fc.bls_hseqcnt | High SEQCNT | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.bls_lastseqid | Last Valid SEQID | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.bls_lseqcnt | Low SEQCNT | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.bls_oxid | OXID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.bls_reason | Reason | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.bls_rjtdetail | Reason Explanation | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.bls_rxid | RXID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.bls_seqidvld | SEQID Valid | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.bls_vnduniq | Vendor Unique Reason | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.crc.bad | Bad checksum | Label | 1.12.0 to 3.4.5 |
fc.cs_ctl | CS_CTL | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.d_id | Dest Addr | Sequence of bytes | 1.0.0 to 3.4.5 |
fc.df_ctl | DF_CTL | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.exchange_first_frame | Exchange First In | Frame number | 1.0.0 to 3.4.5 |
fc.exchange_last_frame | Exchange Last In | Frame number | 1.0.0 to 3.4.5 |
fc.f_ctl | F_CTL | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
fc.fctl.abts_ack | AA | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
fc.fctl.abts_not_ack | AnA | Unsigned integer, 3 bytes | 1.0.0 to 1.8.15 |
fc.fctl.ack_0_1 | A01 | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
fc.fctl.exchange_first | ExgFst | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.exchange_last | ExgLst | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.exchange_responder | ExgRpd | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.last_data_frame | LDF | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
fc.fctl.priority | Pri | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.rel_offset | RelOff | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.rexmitted_seq | RetSeq | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.seq_last | SeqLst | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.seq_recipient | SeqRec | Boolean | 1.0.0 to 3.4.5 |
fc.fctl.transfer_seq_initiative | TSI | Boolean | 1.0.0 to 3.4.5 |
fc.frag_size | Expert Info | Label | 2.0.0 to 2.0.16 |
fc.ftype | Frame type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.id | Addr | Sequence of bytes | 1.0.0 to 3.4.5 |
fc.nethdr.da | Network DA | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fc.nethdr.sa | Network SA | Fibre Channel WWN | 1.0.0 to 3.4.5 |
fc.ox_id | OX_ID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.parameter | Parameter | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fc.r_ctl | R_CTL | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.reassembled | Reassembled Frame | Boolean | 1.0.0 to 3.4.5 |
fc.relative_offset | Relative Offset | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
fc.rx_id | RX_ID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.s_id | Src Addr | Sequence of bytes | 1.0.0 to 3.4.5 |
fc.seq_cnt | SEQ_CNT | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.seq_id | SEQ_ID | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.short_hdr | Packet length is shorter than the required header | Label | 2.0.0 to 3.4.5 |
fc.time | Time from Exchange First | Time offset | 1.0.0 to 3.4.5 |
fc.type | Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.vft | VFT Header | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
fc.vft.hop_ct | HopCT | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.vft.pri | Priority | Unsigned integer, 1 byte | 3.4.0 to 3.4.5 |
fc.vft.rctl | R_CTL | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.vft.type | Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.vft.ver | Version | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
fc.vft.vf_id | VF_ID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance