Display Filter Reference: IEEE 802.3 EPON Preamble
Protocol field name: epon
Versions: 1.12.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| epon.checksum | Frame check sequence | Unsigned integer, 1 byte | 1.12.0 to 3.4.5 |
| epon.checksum.status | Frame check sequence Status | Unsigned integer, 1 byte | 2.4.0 to 3.4.5 |
| epon.checksum_bad.expert | Bad checksum | Label | 1.12.0 to 3.4.5 |
| epon.dpoe.encrypted | Encryption enabled | Boolean | 1.12.0 to 3.4.5 |
| epon.dpoe.encrypted.data | Encrypted data | Sequence of bytes | 1.12.0 to 3.4.5 |
| epon.dpoe.encrypted.expert | Bits 7-2 of DPoE security byte must be 010101 in 1G mode. | Label | 1.12.0 to 3.4.5 |
| epon.dpoe.expert | DPoE security byte must be 0x55 if encryption is disabled. | Label | 1.12.0 to 3.4.5 |
| epon.dpoe.keyid | Key ID | Unsigned integer, 1 byte | 1.12.0 to 3.4.5 |
| epon.dpoe.reserved | Reserved | Unsigned integer, 1 byte | 1.12.0 to 3.4.5 |
| epon.dpoe.sec | DPoE security | Unsigned integer, 1 byte | 1.12.0 to 3.4.5 |
| epon.llid | LLID | Unsigned integer, 2 bytes | 1.12.0 to 3.4.5 |
| epon.mode | Mode | Boolean | 1.12.0 to 3.4.5 |
| epon.sld_bad.expert | Unable to locate SLD or invalid byte sequence: preamble must start with 0xD555 | Label | 1.12.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance