Display Filter Reference: DOF Presentation Protocol V2
Protocol field name: dof.dpp.v2
Versions: 2.2.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| dof.dpp.v2.delay | Delay | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags | Flags | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags.cmdrsp | Command/Response | Boolean | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags.opidtype | Operation ID Type | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags.retry | Retry | Boolean | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags.security | Secure | Boolean | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags.sequence | Sequence | Boolean | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags_included | Default flag value is included explicitly. | Label | 2.2.0 to 3.4.5 |
| dof.dpp.v2.flags_zero | DPS-10: Reserved flag bits must be zero. | Label | 2.2.0 to 3.4.5 |
| dof.dpp.v2.no_context | No security context to enable packet decryption. | Label | 2.2.0 to 3.4.5 |
| dof.dpp.v2.opcnt | Operation Count | Unsigned integer, 4 bytes | 2.2.0 to 3.4.5 |
| dof.dpp.v2.receiver_sid_included | Explicit SID could be optimized, same as receiver. | Label | 2.2.0 to 3.4.5 |
| dof.dpp.v2.retry | Retry | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.flags | Flags | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.flags.as | AS Present | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.flags.partition | Partition Present | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.flags.rdid | Remote Domain ID | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.flags.securitymodeheader | Security Mode Header | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.flags.ssid | SSID Present | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.rdid | Remote Domain Identifier | Unsigned integer, 4 bytes | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.remote-scope | Remote Security Scope | Sequence of bytes | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.scope | Security Scope | Sequence of bytes | 2.2.0 to 3.4.5 |
| dof.dpp.v2.security.ssid | Security State Identifier | Unsigned integer, 4 bytes | 2.2.0 to 3.4.5 |
| dof.dpp.v2.sender_sid_included | Explicit SID could be optimized, same as sender. | Label | 2.2.0 to 3.4.5 |
| dof.dpp.v2.sequence | Sequence | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
| dof.dpp.v2s.opcode | Opcode | Unsigned integer, 1 byte | 2.2.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance