Display Filter Reference: DCP Protection, Fragmentation & Transport Layer
Protocol field name: dcp-pft
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| dcp-pft.addr | Addr | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.cmax | C max | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| dcp-pft.crc | header CRC | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.crc_ok | PFT CRC OK | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.dest | dest addr | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.fcount | Fragment Count | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.fec | FEC | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.findex | Fragment Index | Unsigned integer, 3 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.fragment | Message fragment | Frame number | 1.0.0 to 3.4.5 |
| dcp-pft.fragment.count | Message fragment count | Unsigned integer, 4 bytes | 1.6.0 to 3.4.5 |
| dcp-pft.fragment.error | Message defragmentation error | Frame number | 1.0.0 to 3.4.5 |
| dcp-pft.fragment.multiple_tails | Message has multiple tail fragments | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.fragment.overlap | Message fragment overlap | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.fragment.overlap.conflicts | Message fragment overlapping with conflicting data | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.fragment.too_long_fragment | Message fragment too long | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.fragments | Message fragments | Label | 1.0.0 to 3.4.5 |
| dcp-pft.len | fragment length | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.payload | payload | Sequence of bytes | 1.0.0 to 3.4.5 |
| dcp-pft.pt | Sub-protocol | Unsigned integer, 1 byte | 1.0.0 to 1.8.15 |
| dcp-pft.reassembled.in | Reassembled in | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.reassembled.length | Reassembled DCP (ETSI) length | Unsigned integer, 4 bytes | 1.4.0 to 3.4.5 |
| dcp-pft.rs_corrected | RS Symbols Corrected | Signed integer, 2 bytes | 1.0.0 to 1.8.15 |
| dcp-pft.rs_ok | RS decode OK | Boolean | 1.0.0 to 3.4.5 |
| dcp-pft.rsk | RSk | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| dcp-pft.rsz | RSz | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| dcp-pft.rxmin | Rx min | Unsigned integer, 2 bytes | 1.0.0 to 1.8.15 |
| dcp-pft.seq | Sequence No | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
| dcp-pft.source | source addr | Unsigned integer, 2 bytes | 1.0.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance