Display Filter Reference: Bidirectional Forwarding Detection Control Message
Protocol field name: bfd
Versions: 1.0.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| bfd.auth.key | Authentication Key ID | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.auth.len | Authentication Length | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.auth.len.invalid | Length of authentication section is invalid | Label | 1.12.0 to 3.4.5 |
| bfd.auth.no_data | Authentication flag is set in a BFD packet, but no authentication data is present | Label | 1.12.0 to 3.4.5 |
| bfd.auth.password | Password | Character string | 1.0.0 to 3.4.5 |
| bfd.auth.seq_num | Sequence Number | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| bfd.auth.type | Authentication Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.checksum | Checksum | Sequence of bytes | 2.0.0 to 3.4.5 |
| bfd.desired_min_tx_interval | Desired Min TX Interval | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| bfd.detect_time_multiplier | Detect Time Multiplier | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.diag | Diagnostic Code | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.flags | Message Flags | Unsigned integer, 1 byte | 1.0.0 to 1.8.15, 2.0.0 to 3.4.5 |
| bfd.flags.a | Authentication Present | Boolean | 1.0.0 to 3.4.5 |
| bfd.flags.c | Control Plane Independent | Boolean | 1.0.0 to 3.4.5 |
| bfd.flags.d | Demand | Boolean | 1.0.0 to 3.4.5 |
| bfd.flags.f | Final | Boolean | 1.0.0 to 3.4.5 |
| bfd.flags.h | I hear you | Boolean | 1.0.0 to 3.4.5 |
| bfd.flags.m | Multipoint | Boolean | 1.0.0 to 3.4.5 |
| bfd.flags.p | Poll | Boolean | 1.0.0 to 3.4.5 |
| bfd.mep.ac.id | AC Id | Unsigned integer, 4 bytes | 1.10.0 to 3.4.5 |
| bfd.mep.agi.len | AGI Length | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| bfd.mep.agi.type | AGI TYPE | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| bfd.mep.agi.val | AGI value | Character string | 1.10.0 to 3.4.5 |
| bfd.mep.global.id | Global Id | Unsigned integer, 4 bytes | 1.10.0 to 3.4.5 |
| bfd.mep.interface.no | Interface Number | Unsigned integer, 4 bytes | 1.10.0 to 3.4.5 |
| bfd.mep.len | Length | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| bfd.mep.lsp.no | LSP Number | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| bfd.mep.node.id | Node Id | IPv4 address | 1.10.0 to 3.4.5 |
| bfd.mep.tunnel.no | Tunnel Number | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| bfd.mep.type | Type | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| bfd.message_length | Message Length | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.my_discriminator | My Discriminator | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| bfd.required_min_echo_interval | Required Min Echo Interval | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| bfd.required_min_rx_interval | Required Min RX Interval | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| bfd.sta | Session State | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.version | Protocol Version | Unsigned integer, 1 byte | 1.0.0 to 3.4.5 |
| bfd.your_discriminator | Your Discriminator | Unsigned integer, 4 bytes | 1.0.0 to 3.4.5 |
| mep.ac.id | AC Id | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| mep.agi.len | AGI Length | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| mep.agi.type | AGI TYPE | Unsigned integer, 1 byte | 1.8.0 to 1.8.15 |
| mep.agi.val | AGI value | Character string | 1.8.0 to 1.8.15 |
| mep.global.id | Global Id | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| mep.interface.no | Interface Number | Unsigned integer, 4 bytes | 1.8.0 to 1.8.15 |
| mep.len | Length | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
| mep.lsp.no | LSP Number | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
| mep.node.id | Node Id | IPv4 address | 1.8.0 to 1.8.15 |
| mep.tunnel.no | Tunnel Number | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
| mep.type | Type | Unsigned integer, 2 bytes | 1.8.0 to 1.8.15 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance